UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)
OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION
|
U.S. APPLICATION SERIAL NO. 79234536
MARK: PTW
|
|
|
CORRESPONDENT ADDRESS: |
CLICK HERE TO RESPOND TO THIS LETTER: http://www.gov.uspto.report/trademarks/teas/response_forms.jsp
|
|
APPLICANT: TSUGAMI CORPORATION
|
|
|
CORRESPONDENT’S REFERENCE/DOCKET NO: CORRESPONDENT E-MAIL ADDRESS: |
|
OFFICE ACTION
INTERNATIONAL REGISTRATION NO. 1407733
STRICT DEADLINE TO RESPOND TO THIS NOTIFICATION: TO AVOID ABANDONMENT OF THE REQUEST FOR EXTENSION OF PROTECTION OF THE INTERNATIONAL REGISTRATION, THE USPTO MUST RECEIVE A COMPLETE RESPONSE TO THIS PROVISIONAL FULL REFUSAL NOTIFICATION WITHIN 6 MONTHS OF THE “DATE ON WHICH THE NOTIFICATION WAS SENT TO WIPO (MAILING DATE)” LOCATED ON THE WIPO COVER LETTER ACCOMPANYING THIS NOTIFICATION.
In addition to the Mailing Date appearing on the WIPO cover letter, a holder (hereafter “applicant”) may confirm this Mailing Date using the USPTO’s Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. To do so, enter the U.S. application serial number for this application and then select “Documents.” The Mailing Date used to calculate the response deadline for this provisional full refusal is the “Create/Mail Date” of the “IB-1rst Refusal Note.”
This is a PROVISIONAL FULL REFUSAL of the request for extension of protection of the mark in the above-referenced U.S. application. See 15 U.S.C. §1141h(c). See below in this notification (hereafter “Office action”) for details regarding the provisional full refusal.
SEARCH OF OFFICE’S DATABASE OF MARKS
The trademark examining attorney has searched the Office’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d). TMEP §704.02; see 15 U.S.C. §1052(d).
However, applicant must respond to the following requirements.
MARK DESCRIPTION REQUIREMENT
Therefore, applicant must provide a description of the applied-for mark. The following is suggested:
The mark consists of the stylized letters “PTW” within an oval formed by the letters.
IDENTIFICATION OF GOODS REQUIREMENT
The wording “parts and accessories of metalworking machines and tools” in the identification of goods is indefinite and must be clarified because applicant must specify the types of part and accessory goods provided. See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.
The wording “grinding machines for metalworking and parts and accessories thereof” in the identification of goods is indefinite and must be clarified because applicant must specify the types of part and accessory goods provided. See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.
The wording “lathes for metalworking and parts and accessories thereof” in the identification of goods is indefinite and must be clarified because applicant must specify the types of part and accessory goods provided. See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.
The wording “metalworking machine tools and parts and accessories thereof” in the identification of goods is indefinite and must be clarified because applicant must specify the types of part and accessory goods provided. See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.
The wording “machining centers for metalworking and parts and accessories thereof” in the identification of goods is indefinite and must be clarified because applicant must specify the types of part and accessory goods provided. See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.
The wording “automatic lathes for metalworking and parts and accessories thereof” in the identification of goods is indefinite and must be clarified because applicant must specify the types of part and accessory goods provided. See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.
The wording “rolling machines for metalworking and parts and accessories thereof” in the identification of goods is indefinite and must be clarified because applicant must specify the purpose of the rolling machine goods and the types of part and accessory goods provided. See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.
The wording “turning centers for metalworking and parts and accessories thereof” in the identification of goods is indefinite and must be clarified because applicant must specify the types of part and accessory goods provided. See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.
The wording “tool holders for metalworking machines (parts of machines)” in the identification of goods is indefinite and must be clarified because applicant must remove the parentheses and specify the types of part and accessory goods provided. See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.
The wording “chucks for metalworking machines (parts of machines)” in the identification of goods is indefinite and must be clarified because applicant must remove the parentheses and specify the types of chuck, part and accessory goods provided. See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.
Therefore, applicant must remove the parentheses from the identification and incorporate any parenthetical or bracketed information into the description of the goods.
Applicant may substitute the following wording, if accurate:
Class 007: “Metalworking machines and tools, namely, metalworking machine tools, boring machines for metalworking, broaching machines for metalworking, bending machines for metalworking, cutting machines for metalworking, drilling machines for metalworking and structural parts and accessories thereof; grinding machines for metalworking and structural parts and accessories thereof; lathes for metalworking and structural parts and accessories thereof; metalworking machine tools and structural parts and accessories thereof; metalworking machines, namely, machining centers and structural parts and accessories thereof; automatic lathes for metalworking and structural parts and accessories thereof; metalworking machines, namely, rolling machines for rolling metals and structural parts and accessories thereof; metalworking machines, namely, turning centers and structural parts and accessories thereof; machine tool holders being parts of machines for metalworking machines; drill chucks being parts of machines for metalworking machines”
Applicant may amend the identification to clarify or limit the goods, but not to broaden or expand the goods beyond those in the original application or as acceptably amended. See 37 C.F.R. §2.71(a); TMEP §1402.06. Generally, any deleted goods may not later be reinserted. See TMEP §1402.07(e). Additionally, for applications filed under Trademark Act Section 66(a), the scope of the identification for purposes of permissible amendments is limited by the international class assigned by the International Bureau of the World Intellectual Property Organization (International Bureau); and the classification of goods may not be changed from that assigned by the International Bureau. 37 C.F.R. §2.85(d); TMEP §§1401.03(d), 1904.02(b). Further, in a multiple-class Section 66(a) application, classes may not be added or goods transferred from one existing class to another. 37 C.F.R. §2.85(d); TMEP §1401.03(d).
For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual. See TMEP §1402.04.
TRADEMARK ATTORNEY ADVISORY
Because of the legal technicalities and strict deadlines involved in the USPTO application process, applicant may wish to hire a qualified U.S. attorney specializing in trademark matters to represent applicant in this process and provide legal advice. Although the undersigned trademark examining attorney is permitted to help an applicant understand the contents of an Office action as well as the application process in general, no USPTO attorney or staff is permitted to give an applicant legal advice or statements about an applicant’s legal rights. TMEP §§705.02, 709.06. For attorney referral information, applicant may consult the American Bar Association’s Consumers’ Guide to Legal Help or an online directory of legal professionals, such as FindLaw®. The USPTO, however, may not assist an applicant in the selection of a private attorney. 37 C.F.R. §2.11.
Please note that foreign attorneys, other than authorized Canadian attorneys, are not permitted to represent applicants before the USPTO (e.g., file written communications, authorize an amendment to an application, or submit legal arguments in response to a requirement or refusal). See 37 C.F.R. §§2.17(e), 11.14(c), (e); TMEP §602.03-.03(c).
The only attorneys who may practice before the USPTO in trademark matters are as follows:
(1) Attorneys in good standing with a bar of the highest court of any U.S. state, the District of Columbia, Puerto Rico, and other U.S. commonwealths or U.S. territories; and
(2) Canadian agents/attorneys who represent applicants located in Canada and (a) are registered with the USPTO and in good standing as patent agents or (b) have been granted reciprocal recognition by the USPTO.
See 37 C.F.R. §§2.17(a), (e), 11.1, 11.14(a), (c); TMEP §602.
MANDATORY ELECTRONIC FILING RULES ADVISORY
The USPTO proposes to change federal trademark rules to require applicants and registrants to (1) file submissions concerning applications and registrations online using the USPTO’s Trademark Electronic Application System (TEAS) and (2) provide and maintain an accurate email address for receiving correspondence from the USPTO. See the Mandatory Electronic Filing Rules webpage for more information.
RESPONSE GUIDELINES
For this application to proceed further, applicant must explicitly address each refusal and/or requirement raised in this Office action. If the action includes a refusal, applicant may provide arguments and/or evidence as to why the refusal should be withdrawn and the mark should register. Applicant may also have other options specified in this Office action for responding to a refusal and should consider those options carefully. To respond to requirements and certain refusal response options, applicant should set forth in writing the required changes or statements. For more information and general tips on responding to USPTO Office actions, response options, and how to file a response online, see “Responding to Office Actions” on the USPTO’s website.
If applicant does not respond to this Office action within six months of the issue/mailing date, or responds by expressly abandoning the application, the application process will end and the trademark will fail to register. See 15 U.S.C. §1062(b); 37 C.F.R. §§2.65(a), 2.68(a); TMEP §§718.01, 718.02. Additionally, the USPTO will not refund the application filing fee, which is a required processing fee. See 37 C.F.R. §§2.6(a)(1)(i)-(iv), 2.209(a); TMEP §405.04.
When an application has abandoned for failure to respond to an Office action, an applicant may timely file a petition to revive the application, which, if granted, would allow the application to return to active status. See 37 C.F.R. §2.66; TMEP §1714. The petition must be filed within two months of the date of issuance of the notice of abandonment and may be filed online via the Trademark Electronic Application System (TEAS) with a $100 fee. See 37 C.F.R. §§2.6(a)(15)(ii), 2.66(a)(1), (b)(1).
WHO IS PERMITTED TO RESPOND TO THIS PROVISIONAL FULL REFUSAL: Any response to this provisional refusal must be personally signed by an individual applicant, all joint applicants, or someone with legal authority to bind a juristic applicant (e.g., a corporate officer or general partner). 37 C.F.R. §§2.62(b), 2.193(e)(2)(ii); TMEP §712.01. If applicant hires a qualified U.S. attorney to respond on his or her behalf, then the attorney must sign the response. 37 C.F.R. §§2.193(e)(2)(i), 11.18(a); TMEP §§611.03(b), 712.01. Qualified U.S. attorneys include those in good standing with a bar of the highest court of any U.S. state, the District of Columbia, Puerto Rico, and other U.S. commonwealths or U.S. territories. See 37 C.F.R. §§2.17(a), 2.62(b), 11.1, 11.14(a); TMEP §§602, 712.01. Additionally, for all responses, the proper signatory must personally sign the document or personally enter his or her electronic signature on the electronic filing. See 37 C.F.R. §2.193(a); TMEP §§611.01(b), 611.02. The name of the signatory must also be printed or typed immediately below or adjacent to the signature, or identified elsewhere in the filing. 37 C.F.R. §2.193(d); TMEP §611.01(b).
In general, foreign attorneys are not permitted to represent applicants before the USPTO (e.g., file written communications, authorize an amendment to an application, or submit legal arguments in response to a requirement or refusal). See 37 C.F.R. §11.14(c), (e); TMEP §§602.03-.03(b), 608.01.
DESIGNATION OF DOMESTIC REPRESENTATIVE: The USPTO encourages applicants who do not reside in the United States to designate a domestic representative upon whom any notice or process may be served. TMEP §610; see 15 U.S.C. §§1051(e), 1141h(d); 37 C.F.R. §2.24(a)(1)-(2). Such designations may be filed online at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.
/Rebecca Lee/
Examining Attorney
Law Office 122
(571) 272 - 7809
Rebecca.Lee1@uspto.gov
TO RESPOND TO THIS LETTER: Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp. Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application. For technical assistance with online forms, e-mail TEAS@uspto.gov. For questions about the Office action itself, please contact the assigned trademark examining attorney. E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.
All informal e-mail communications relevant to this application will be placed in the official application record.
WHO MUST SIGN THE RESPONSE: It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants). If an applicant is represented by an attorney, the attorney must sign the response.
PERIODICALLY CHECK THE STATUS OF THE APPLICATION: To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. Please keep a copy of the TSDR status screen. If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199. For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.
TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS: Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.