Offc Action Outgoing

UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION

 

 

 

OFFICE ACTION

 

INTERNATIONAL REGISTRATION NO. 1401637

 

STRICT DEADLINE TO RESPOND TO THIS NOTIFICATION:  TO AVOID ABANDONMENT OF THE REQUEST FOR EXTENSION OF PROTECTION OF THE INTERNATIONAL REGISTRATION, THE USPTO MUST RECEIVE A COMPLETE RESPONSE TO THIS PROVISIONAL FULL REFUSAL NOTIFICATION WITHIN 6 MONTHS OF THE “DATE ON WHICH THE NOTIFICATION WAS SENT TO WIPO (MAILING DATE)” LOCATED ON THE WIPO COVER LETTER ACCOMPANYING THIS NOTIFICATION.

 

In addition to the Mailing Date appearing on the WIPO cover letter, a holder (hereafter “applicant”) may confirm this Mailing Date using the USPTO’s Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  To do so, enter the U.S. application serial number for this application and then select “Documents.”  The Mailing Date used to calculate the response deadline for this provisional full refusal is the “Create/Mail Date” of the “IB-1rst Refusal Note.”

 

This is a PROVISIONAL FULL REFUSAL of the request for extension of protection of the mark in the above-referenced U.S. application.  See 15 U.S.C. §1141h(c).  See below in this notification (hereafter “Office action”) for details regarding the provisional full refusal.

 

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issue(s) below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

SUMMARY OF ISSUES applicant must address:

 

• Disclaimer Required
• Identification of Goods

 

SEARCH OF OFFICE’S DATABASE OF MARKS

 

The trademark examining attorney has searched the Office’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d).  TMEP §704.02; see 15 U.S.C. §1052(d).

 

DISCLAIMER REQUIRED

 

Applicant must disclaim the wording “FRESH” because it merely describes a function, purpose, or use of applicant’s goods, and thus is an unregistrable component of the mark.  See 15 U.S.C. §§1052(e)(1), 1056(a); DuoProSS Meditech Corp. v. Inviro Med. Devices, Ltd., 695 F.3d 1247, 1251, 103 USPQ2d 1753, 1755 (Fed. Cir. 2012) (quoting In re Oppedahl & Larson LLP, 373 F.3d 1171, 1173, 71 USPQ2d 1370, 1371 (Fed. Cir. 2004)); TMEP §§1213, 1213.03(a). 

 

The attached dictionary evidence shows that the term “FRESH” is defined as “not stale or spoiled.”  Moreover, the wording “FRESH” appears expressly in applicant’s identification of goods—i.e., “packaging materials of plastic for the fresh-keeping and preserving of food, flowers and other perishable goods.”  In other words, applicant’s goods are used to keep perishable items fresh.  Therefore, the wording merely describes a function, purpose or use of applicant’s goods.

 

An applicant may not claim exclusive rights to terms that others may need to use to describe their goods and/or services in the marketplace.  See Dena Corp. v. Belvedere Int’l, Inc., 950 F.2d 1555, 1560, 21 USPQ2d 1047, 1051 (Fed. Cir. 1991); In re Aug. Storck KG, 218 USPQ 823, 825 (TTAB 1983).  A disclaimer of unregistrable matter does not affect the appearance of the mark; that is, a disclaimer does not physically remove the disclaimed matter from the mark.  See Schwarzkopf v. John H. Breck, Inc., 340 F.2d 978, 978, 144 USPQ 433, 433 (C.C.P.A. 1965); TMEP §1213. 

 

A “disclaimer” is a statement in the application record that an applicant does not claim exclusive rights to an unregistrable component of the mark; a disclaimer of unregistrable matter does not affect the appearance of the mark or physically remove disclaimed matter from the mark.  See Schwarzkopf v. John H. Breck, Inc., 340 F.2d 978, 978, 144 USPQ 433, 433 (C.C.P.A. 1965); TMEP §1213.  An unregistrable component of a mark includes wording and designs that are merely descriptive of an applicant’s goods.  15 U.S.C. §1052(e); see TMEP §§1209.03(f), 1213.03 et seq.  Such words or designs need to be freely available for other businesses to market comparable goods or services and should not become the proprietary domain of any one party.  See Dena Corp. v. Belvedere Int’l, Inc., 950 F.2d 1555, 1560, 21 USPQ2d 1047, 1051 (Fed. Cir. 1991); In re Aug. Storck KG, 218 USPQ 823, 825 (TTAB 1983).

 

If applicant does not provide the required disclaimer, the USPTO may refuse to register the entire mark.  See In re Stereotaxis Inc., 429 F.3d 1039, 1040-41, 77 USPQ2d 1087, 1088-89 (Fed. Cir. 2005); TMEP §1213.01(b).

 

Applicant should submit a disclaimer in the following standardized format:

 

No claim is made to the exclusive right to use “FRESH” apart from the mark as shown.

 

For an overview of disclaimers and instructions on how to satisfy this disclaimer requirement online using the Trademark Electronic Application System (TEAS) form, please go to http://www.gov.uspto.report/trademarks/law/disclaimer.jsp.

 

IDENTIFICATION OF GOODS

 

Portions of applicant’s identification of goods are indefinite and/or overbroad and must be clarified because the precise nature of the goods is unclear.  TMEP §§1402.01, 1402.03.  The USPTO has the discretion to determine the degree of particularity needed to clearly identify the goods and/or services covered by a mark.  In re Fiat Grp. Mktg. & Corp. Commc’ns S.p.A, 109 USPQ2d 1593, 1597 (TTAB 2014) (citing In re Omega SA, 494 F.3d 1362, 1365, 83 USPQ2d 1541, 1543-44 (Fed. Cir. 2007)).  Accordingly, the USPTO requires the description of goods and services in a U.S. application to be specific, definite, clear, accurate, and concise.  TMEP §1402.01; see In re Fiat Grp. Mktg. & Corp. Commc’ns S.p.A, 109 USPQ2d at 1597-98; Cal. Spray-Chem. Corp. v. Osmose Wood Pres. Co. of Am., 102 USPQ 321, 322 (Comm’r Pats. 1954).  Explanations and suggested acceptable wording are found below.

 

In International Class 16:

 

The identification of goods contains brackets.  Generally, applicants should not use parentheses and brackets in identifications in their applications so as to avoid confusion with the USPTO’s practice of using parentheses and brackets in registrations to indicate goods and/or services that have been deleted from registrations or in an affidavit of incontestability to indicate goods and/or services not claimed.  See TMEP §1402.12.  The only exception is that parenthetical information is permitted in identifications in an application if it serves to explain or translate the matter immediately preceding the parenthetical phrase in such a way that it does not affect the clarity or scope of the identification, e.g., “fried tofu pieces (abura-age).”  Id.

 

Therefore, applicant must remove the brackets from the identification and incorporate any parenthetical or bracketed information into the description of the goods.

 

In International Class 17:

 

The wording “plastic semi-worked products” in the identification of goods is indefinite and must be clarified because the precise nature of the goods is unclear.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.  Applicant must amend this wording to specify the common commercial or generic name of the goods.  See TMEP §1402.01.  Specifically, applicant must make clear the form of the goods—e.g., plastic in the form of blocks, bars, sheets and pellets for use in the further manufacture

 

The wording “plastic semi-worked products for use in manufacture of bags [pouches]of plastics, for packaging” in the identification of goods is indefinite and must be clarified because the precise nature of the goods is unclear.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.  Applicant must amend this wording to specify the common commercial or generic name of the goods.  See TMEP §1402.01.  Specifically, applicant must make clear the form of the goods—e.g., blocks, bars, sheets, pellets.

 

The wording “plastic semi-worked products for use in manufacture of plastic film for wrapping” in the identification of goods is indefinite and must be clarified because the precise nature of the goods is unclear.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.  Applicant must amend this wording to specify the common commercial or generic name of the goods.  See TMEP §1402.01.  Specifically, applicant must make clear the form of the goods—e.g., blocks, bars, sheets, pellets.

 

The wording “plastic semi-worked products for use in manufacture of plastic film for wrapping” in the identification of goods is indefinite and must be clarified because the precise nature of the goods is unclear.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.  Applicant must amend this wording to specify the common commercial or generic name of the goods.  See TMEP §1402.01.  Specifically, applicant must make clear the form of the goods—e.g., blocks, bars, sheets, pellets.

 

The wording “antibacterial and mildew-proofing plastic sheet and film” in the identification of goods is indefinite and must be clarified because the precise nature of the goods is unclear.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.  Applicant must amend this wording to specify the common commercial or generic name of the goods.  See TMEP §1402.01.  

 

The wording “plastic film other than for wrapping” in the identification of goods is indefinite and must be clarified because the precise nature of the goods is unclear.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.  Applicant must amend this wording to specify the common commercial or generic name of the goods.  See TMEP §1402.01.  

 

The following identification of goods is suggested, if accurate (changes in bold):

 

• Class 16:  Bags of plastics, for packaging; food wrapping plastic film for household use; plastic food storage bags for household use; plastic film and sheet used as packaging for food; plastic wrap; plastic sheet and film for wrapping and packaging; packaging materials of plastic for the fresh-keeping and preserving of perishable goods; packaging materials of plastic for the fresh-keeping and preserving of food, flowers and other perishable goods; packaging film of plastic for the fresh-keeping and preserving perishable goods; packaging film of plastic for the fresh-keeping and preserving of food, flowers and other perishable goods; packaging bags of plastic for the fresh-keeping and preserving perishable goods; packaging bags of plastic for the fresh-keeping and preserving of food, flowers and other perishable goods

 

• Class 17:  Plastic semi-worked products, namely, {specify Class 17 goods, e.g., Plastic in the form of bars, blocks, pellets, rods, sheets and tubes for use in manufacturing}; plastic substances, semi-processed; plastic semi-worked products in the form of {specify form of semi-worked plastic, e.g., bars, blocks, pellets, rods, sheets and tubes} for use in manufacture of bags of plastics, in the field of packaging; plastic semi-worked products in the form of {specify form of semi-worked plastic, e.g., bars, blocks, pellets, rods, sheets and tubes} for use in manufacture of plastic film for wrapping; plastic film for use in manufacture of bags of plastics, for packaging; plastic film for use in manufacture of plastic film for wrapping; plastic film for use in manufacture of plastic sheet for wrapping; plastic sheets for use in manufacture of bags of plastics, for use in the field of packaging; plastic sheet for use in manufacture of plastic film for wrapping; plastic sheet for use in manufacture of plastic sheet for wrapping; antibacterial and mildew-proofing semi-processed plastic sheets and films; plastic film {specify a Class 17 purpose, e.g., for industrial and commercial packing use}, other than for wrapping

 

Applicant may amend the identification to clarify or limit the goods, but not to broaden or expand the goods beyond those in the original application or as acceptably amended.  See 37 C.F.R. §2.71(a); TMEP §1402.06.  Generally, any deleted goods and/or services may not later be reinserted.  See TMEP §1402.07(e).  Additionally, for applications filed under Trademark Act Section 66(a), the scope of the identification for purposes of permissible amendments is limited by the international class assigned by the International Bureau of the World Intellectual Property Organization (International Bureau); and the classification of goods and/or services may not be changed from that assigned by the International Bureau.  37 C.F.R. §2.85(d); TMEP §§1401.03(d), 1904.02(b).  Further, in a multiple-class Section 66(a) application, classes may not be added or goods and/or services transferred from one existing class to another.  37 C.F.R. §2.85(d); TMEP §1401.03(d).

 

For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual.  See TMEP §1402.04.

 

RESPONSE GUIDELINES

 

For this application to proceed further, applicant must explicitly address each refusal and/or requirement raised in this Office action.  If the action includes a refusal, applicant may provide arguments and/or evidence as to why the refusal should be withdrawn and the mark should register.  Applicant may also have other options specified in this Office action for responding to a refusal, and should consider those options carefully.  To respond to requirements and certain refusal response options, applicant should set forth in writing the required changes or statements.  For more information and general tips on responding to USPTO Office actions, response options, and how to file a response online, see “Responding to Office Actions” on the USPTO’s website.

 

If applicant does not respond to this Office action within six months of the date on which the USPTO sends this Office action to the International Bureau, or responds by expressly abandoning the application, the application process will end and the trademark will fail to register.  See 15 U.S.C. §1062(b); 37 C.F.R. §§2.65(a), 2.68(a); TMEP §§711, 718.01, 718.02. 

 

When an application has abandoned for failure to respond to an Office action, an applicant may timely file a petition to revive the application, which, if granted, would allow the application to return to active status.  See 37 C.F.R. §2.66; TMEP §1714.  The petition must be filed within two months of the date of issuance of the notice of abandonment and may be filed online via the Trademark Electronic Application System (TEAS) with a $100 fee.  See 37 C.F.R. §§2.6(a)(15)(ii), 2.66(a)(1), (b)(1).

 

HIRING A TRADEMARK ATTORNEY SUGGESTED

 

Because of the legal technicalities and strict deadlines involved in the USPTO application process, applicant may wish to hire a qualified U.S. attorney specializing in trademark matters to represent applicant in this process and provide legal advice.  Although the undersigned trademark examining attorney is permitted to help an applicant understand the contents of an Office action as well as the application process in general, no USPTO attorney or staff is permitted to give an applicant legal advice or statements about an applicant’s legal rights.  TMEP §§705.02, 709.06.  For attorney referral information, applicant may consult the American Bar Association’s Consumers’ Guide to Legal Help or an online directory of legal professionals, such as FindLaw®.  The USPTO, however, may not assist an applicant in the selection of an attorney.  37 C.F.R. §2.11.

 

Please note that foreign attorneys, other than authorized Canadian attorneys, are not permitted to represent applicants before the USPTO (e.g., file written communications, authorize an amendment to an application, or submit legal arguments in response to a requirement or refusal).  See 37 C.F.R. §§2.17(e), 11.14(c), (e); TMEP §602.03-.03(c). 

 

 

 

WHO IS PERMITTED TO RESPOND TO THIS PROVISIONAL FULL REFUSAL:  Any response to this provisional refusal must be personally signed by an individual applicant, all joint applicants, or someone with legal authority to bind a juristic applicant (e.g., a corporate officer or general partner).  37 C.F.R. §§2.62(b), 2.193(e)(2)(ii); TMEP §712.01.  If applicant hires a qualified U.S. attorney to respond on his or her behalf, then the attorney must sign the response.  37 C.F.R. §§2.193(e)(2)(i), 11.18(a); TMEP §§611.03(b), 712.01.  Qualified U.S. attorneys include those in good standing with a bar of the highest court of any U.S. state, the District of Columbia, Puerto Rico, and other U.S. commonwealths or U.S. territories.  See 37 C.F.R. §§2.17(a), 2.62(b), 11.1, 11.14(a); TMEP §§602, 712.01.  Additionally, for all responses, the proper signatory must personally sign the document or personally enter his or her electronic signature on the electronic filing.  See 37 C.F.R. §2.193(a); TMEP §§611.01(b), 611.02.  The name of the signatory must also be printed or typed immediately below or adjacent to the signature, or identified elsewhere in the filing.  37 C.F.R. §2.193(d); TMEP §611.01(b).

 

In general, foreign attorneys are not permitted to represent applicants before the USPTO (e.g., file written communications, authorize an amendment to an application, or submit legal arguments in response to a requirement or refusal).  See 37 C.F.R. §11.14(c), (e); TMEP §§602.03-.03(b), 608.01. 

 

DESIGNATION OF DOMESTIC REPRESENTATIVE:  The USPTO encourages applicants who do not reside in the United States to designate a domestic representative upon whom any notice or process may be served.  TMEP §610; see 15 U.S.C. §§1051(e), 1141h(d); 37 C.F.R. §2.24(a)(1)-(2).  Such designations may be filed online at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp. 

 

 

 

 

/Eric Sable/

Law Office 117

571-272-4653

Eric.Sable@uspto.gov

 

TO RESPOND TO THIS LETTER:  Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.  Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application.  For technical assistance with online forms, e-mail TEAS@uspto.gov.  For questions about the Office action itself, please contact the assigned trademark examining attorney.  E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

 

All informal e-mail communications relevant to this application will be placed in the official application record.

 

WHO MUST SIGN THE RESPONSE:  It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants).  If an applicant is represented by an attorney, the attorney must sign the response. 

 

PERIODICALLY CHECK THE STATUS OF THE APPLICATION:  To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  Please keep a copy of the TSDR status screen.  If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199.  For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

 

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS:  Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.