Offc Action Outgoing

PT

Polytech GmbH

Offc Action Outgoing

UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION

 

U.S. APPLICATION SERIAL NO.  79229420

 

MARK: PT

 

 

        

*79229420*

CORRESPONDENT ADDRESS:

       Schmitt-Nilson Schraud Waibel Wohlfrom

       Patentanwälte Partnerschaft mbB

       Destouchesstr. 68

       80796 München

       FED REP GERMANY

 

CLICK HERE TO RESPOND TO THIS LETTER:

http://www.gov.uspto.report/trademarks/teas/response_forms.jsp

 

 

 

APPLICANT: Polytech GmbH

 

 

 

CORRESPONDENT’S REFERENCE/DOCKET NO:  

       N/A

CORRESPONDENT E-MAIL ADDRESS: 

       

 

 

 

OFFICE ACTION

 

 

INTERNATIONAL REGISTRATION NO. 1395439

 

STRICT DEADLINE TO RESPOND TO THIS NOTIFICATION:  TO AVOID ABANDONMENT OF THE REQUEST FOR EXTENSION OF PROTECTION OF THE INTERNATIONAL REGISTRATION, THE USPTO MUST RECEIVE A COMPLETE RESPONSE TO THIS PROVISIONAL FULL REFUSAL NOTIFICATION WITHIN 6 MONTHS OF THE “DATE ON WHICH THE NOTIFICATION WAS SENT TO WIPO (MAILING DATE)” LOCATED ON THE WIPO COVER LETTER ACCOMPANYING THIS NOTIFICATION.

 

In addition to the Mailing Date appearing on the WIPO cover letter, a holder (hereafter “applicant”) may confirm this Mailing Date using the USPTO’s Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  To do so, enter the U.S. application serial number for this application and then select “Documents.”  The Mailing Date used to calculate the response deadline for this provisional full refusal is the “Create/Mail Date” of the “IB-1rst Refusal Note.”

 

This is a PROVISIONAL FULL REFUSAL of the request for extension of protection of the mark in the above-referenced U.S. application.  See 15 U.S.C. §1141h(c).  See below in this notification (hereafter “Office action”) for details regarding the provisional full refusal.

 

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issue(s) below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

 

SUMMARY OF ISSUES:

 

  • Prior-Filed Application
  • Identification of Goods
  • Issue Regarding Applicant’s Entity Type
  • Response Guidelines

 

I.                PRIOR-FILED APPLICATION

 

The trademark examining attorney has searched the USPTO’s database of registered and pending marks and has found no similar registered marks that would bar registration under Trademark Act Section 2(d).  TMEP §704.02; see 15 U.S.C. §1052(d).  However, a mark in a prior-filed pending application may present a bar to registration of applicant’s mark.

 

The filing date of pending U.S. Application Serial No. 79196862 precedes applicant’s filing date.  See attached referenced application.  If the mark in the referenced application registers, applicant’s mark may be refused registration under Trademark Act Section 2(d) because of a likelihood of confusion between the two marks.  See 15 U.S.C. §1052(d); 37 C.F.R. §2.83; TMEP §§1208 et seq.  Therefore, upon receipt of applicant’s response to this Office action, action on this application may be suspended pending final disposition of the earlier-filed referenced application.

 

In response to this Office action, applicant may present arguments in support of registration by addressing the issue of the potential conflict between applicant’s mark and the mark in the referenced application.  Applicant’s election not to submit arguments at this time in no way limits applicant’s right to address this issue later if a refusal under Section 2(d) issues.

 

Applicant should note the requirement stated below.

 

II.             IDENTIFICATION OF GOODS

 

Certain wording in the identification of goods in International Class 019 is indefinite and too broad.  This wording must be clarified because it is not clear what the goods are and could identify goods in more than one international class.  See 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.03, 1904.02(c), (c)(ii).  More specifically, the wording “building and construction materials and elements, not of metal” is indefinite as to the specific goods provided by the applicant; as such, this wording must be amended to clearly describe the specific materials and elements provided that are classified in International Class 019.

 

The wording “work platforms and components thereof, made of artificial resin or plastic” is also indefinite as to the specific type of goods provided since this wording could refer to elevating work platforms which are classified in a different International Class.  As such, applicant must amend the identification of goods to clearly indicate the overall nature of the platforms provided.

 

The wording “grandstands and components thereof, made of artificial resin or plastic” is indefinite and overly broad since it appears to refer to goods in the nature of benches for sports fields which would be classified in International Class 020 rather than International Class 019.  As such, applicant must specify the nature of the goods provided in International Class 019 or delete this wording from the identification.

 

Similarly, the wording “fall protections, made of artificial resin or plastic, for buildings, shutterings, scaffoldings and work platforms” appears to be indefinite and overly broad since it appears to refer to goods classified in International Class 009 rather than International Class 019.  For example, fall protection equipment for fall restraint and arrest  in the nature of lines, harnesses, beam grips, bars, anchors, harnesses, and carabiners are all classified in International Class 009.  As such, applicant must specify which International Class 019 goods are provided or delete this wording from the identification.

 

In an application filed under Trademark Act Section 66(a), an applicant may not change the classification of goods from that assigned by the International Bureau of the World Intellectual Property Organization in the corresponding international registration.  37 C.F.R. §2.85(d); TMEP §§1401.03(d), 1904.02(b).  Therefore, although the goods may be classified in several international classes, any modification to this wording must identify goods in the designated International Classes.  See TMEP §1904.02(c), (c)(ii).

 

Applicant may adopt the following wording in International Classes, if accurate:

 

International Class 001

 

Unprocessed artificial resins and unprocessed plastics; unprocessed artificial resins and unprocessed plastics, for manufacturing products for use in the field of civil engineering and construction engineering


International Class 019

 

Building and construction materials and elements, not of metal, namely, sulfur polymer cement, composite lumber made using recycled plastic, and plastic tiles, plastic wallboards, and plastic floor boards; Shuttering and components thereof, made of artificial resin or plastic, for concrete; Casting forms and components thereof, made of artificial resin or plastic, for concrete; Scaffolding and components thereof, made of artificial resin or plastic; Work platforms in the nature of non-metal scaffolding and components thereof, made of artificial resin or plastic; Retaining walls and components thereof, made of artificial resin or plastic; Portable barriers, made of artificial resin or plastic, for pedestrians and vehicles; Crash barriers, made of artificial resin or plastic, for roads.

 

Applicant may amend the identification to clarify or limit the goods and/or services, but not to broaden or expand the goods and/or services beyond those in the original application or as acceptably amended.  See 37 C.F.R. §2.71(a); TMEP §1402.06.  Generally, any deleted goods and/or services may not later be reinserted.  See TMEP §1402.07(e).  Additionally, for applications filed under Trademark Act Section 66(a), the scope of the identification for purposes of permissible amendments is limited by the international class assigned by the International Bureau of the World Intellectual Property Organization (International Bureau); and the classification of goods and/or services may not be changed from that assigned by the International Bureau.  37 C.F.R. §2.85(d); TMEP §§1401.03(d), 1904.02(b).  Further, in a multiple-class Section 66(a) application, classes may not be added or goods and/or services transferred from one existing class to another.  37 C.F.R. §2.85(d); TMEP §1401.03(d).

 

Applicant should note the requirement stated below.

 

III.             ISSUE REGARDING APPLICANT’S ENTITY TYPE

 

Applicant must specify its form of business or type of legal entity and its national citizenship or foreign country of organization or incorporation.  See 37 C.F.R. §§2.32(a)(3)(i)-(ii), 7.25(a)-(b); TMEP §§803.03, 803.04, 1904.02(a).  This information is required in all U.S. trademark applications, including those filed under Trademark Act Section 66(a) (also known as “requests for extension of protection of international registrations to the United States”).  See 37 C.F.R. §§2.32(a)(3)(i)-(ii), 7.25(a)-(b); TMEP §§803.03, 803.04, 1904.02(a). 

 

Acceptable entity types include an individual, a partnership, a corporation, a joint venture, or the foreign equivalent.  See 37 C.F.R. §2.32(a)(3)(i)-(ii); TMEP §§803.03 et seq.

 

If applicant’s entity type is an individual, applicant must indicate his or her national citizenship for the record.  See 37 C.F.R. §2.32(a)(3)(i); TMEP §803.04.  If applicant’s entity type is a corporation, association, partnership, joint venture, or the foreign equivalent, applicant must set forth the foreign country under whose laws applicant is organized or incorporated.  37 C.F.R. §2.32(a)(3)(ii); TMEP §§803.03(b)-(c), 803.04.  For an association, applicant must also specify whether the association is incorporated or unincorporated, unless the foreign country and the designation or description “association/associazione” appear in Appendix D of the Trademark Manual of Examining Procedure (TMEP).  TMEP §803.03(c).

 

If applicant is organized under the laws of a foreign province or geographical region, applicant should specify both the foreign province or geographical region and the foreign country in which the province or region is located.  See TMEP §803.04.  To provide this information online via the Trademark Electronic Application System (TEAS) response form, applicant must (1) locate the “Entity Type” heading and select “Other;” (2) locate the “Specify Entity Type” heading and select “Other” under the Foreign Entity option, and enter in the free-text field below both applicant’s entity type and the foreign province or geographical region of its organization (e.g., partnership of Victoria); and (3) locate the “State or Country Where Legally Organized” heading and select the appropriate foreign country (e.g., Australia) under the Non-U.S. Entity option.  See id.

 

Applicant should note the response guidelines stated below.

 

IV.            RESPONSE GUIDELINES

 

For this application to proceed further, applicant must explicitly address each refusal and/or requirement raised in this Office action.  If the action includes a refusal, applicant may provide arguments and/or evidence as to why the refusal should be withdrawn and the mark should register.  Applicant may also have other options specified in this Office action for responding to a refusal, and should consider those options carefully.  To respond to requirements and certain refusal response options, applicant should set forth in writing the required changes or statements.  For more information and general tips on responding to USPTO Office actions, response options, and how to file a response online, see “Responding to Office Actions” on the USPTO’s website.

 

If applicant does not respond to this Office action within six months of the date on which the USPTO sends this Office action to the International Bureau, or responds by expressly abandoning the application, the application process will end and the trademark will fail to register.  See 15 U.S.C. §1062(b); 37 C.F.R. §§2.65(a), 2.68(a); TMEP §§711, 718.01, 718.02. 

 

When an application has abandoned for failure to respond to an Office action, an applicant may timely file a petition to revive the application, which, if granted, would allow the application to return to active status.  See 37 C.F.R. §2.66; TMEP §1714.  The petition must be filed within two months of the date of issuance of the notice of abandonment and may be filed online via the Trademark Electronic Application System (TEAS) with a $100 fee.  See 37 C.F.R. §§2.6(a)(15)(ii), 2.66(a)(1), (b)(1).

 

Because of the legal technicalities and strict deadlines involved in the USPTO application process, applicant may wish to hire a qualified U.S. attorney specializing in trademark matters to represent applicant in this process and provide legal advice.  Although the undersigned trademark examining attorney is permitted to help an applicant understand the contents of an Office action as well as the application process in general, no USPTO attorney or staff is permitted to give an applicant legal advice or statements about an applicant’s legal rights.  TMEP §§705.02, 709.06.  For attorney referral information, applicant may consult the American Bar Association’s Consumers’ Guide to Legal Help or an online directory of legal professionals, such as FindLaw®.  The USPTO, however, may not assist an applicant in the selection of an attorney.  37 C.F.R. §2.11.

 

Please note that foreign attorneys, other than authorized Canadian attorneys, are not permitted to represent applicants before the USPTO (e.g., file written communications, authorize an amendment to an application, or submit legal arguments in response to a requirement or refusal).  See 37 C.F.R. §§2.17(e), 11.14(c), (e); TMEP §602.03-.03(c). 

 

If applicant has questions regarding this Office action, please telephone or e-mail the assigned trademark examining attorney.  All relevant e-mail communications will be placed in the official application record; however, an e-mail communication will not be accepted as a response to this Office action and will not extend the deadline for filing a proper response.  See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05.  Further, although the trademark examining attorney may provide additional explanation pertaining to the refusal(s) and/or requirement(s) in this Office action, the trademark examining attorney may not provide legal advice or statements about applicant’s rights.  See TMEP §§705.02, 709.06.

 

WHO IS PERMITTED TO RESPOND TO THIS PROVISIONAL FULL REFUSAL:  Any response to this provisional refusal must be personally signed by an individual applicant, all joint applicants, or someone with legal authority to bind a juristic applicant (e.g., a corporate officer or general partner).  37 C.F.R. §§2.62(b), 2.193(e)(2)(ii); TMEP §712.01.  If applicant hires a qualified U.S. attorney to respond on his or her behalf, then the attorney must sign the response.  37 C.F.R. §§2.193(e)(2)(i), 11.18(a); TMEP §§611.03(b), 712.01.  Qualified U.S. attorneys include those in good standing with a bar of the highest court of any U.S. state, the District of Columbia, Puerto Rico, and other U.S. commonwealths or U.S. territories.  See 37 C.F.R. §§2.17(a), 2.62(b), 11.1, 11.14(a); TMEP §§602, 712.01.  Additionally, for all responses, the proper signatory must personally sign the document or personally enter his or her electronic signature on the electronic filing.  See 37 C.F.R. §2.193(a); TMEP §§611.01(b), 611.02.  The name of the signatory must also be printed or typed immediately below or adjacent to the signature, or identified elsewhere in the filing.  37 C.F.R. §2.193(d); TMEP §611.01(b).

 

In general, foreign attorneys are not permitted to represent applicants before the USPTO (e.g., file written communications, authorize an amendment to an application, or submit legal arguments in response to a requirement or refusal).  See 37 C.F.R. §11.14(c), (e); TMEP §§602.03-.03(b), 608.01. 

 

DESIGNATION OF DOMESTIC REPRESENTATIVE:  The USPTO encourages applicants who do not reside in the United States to designate a domestic representative upon whom any notice or process may be served.  TMEP §610; see 15 U.S.C. §§1051(e), 1141h(d); 37 C.F.R. §2.24(a)(1)-(2).  Such designations may be filed online at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp. 

 

 

 

 

/Amer Raja/

Examining Attorney

Law Office 121

(571) 270-5936

amer.raja@uspto.gov

 

TO RESPOND TO THIS LETTER:  Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.  Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application.  For technical assistance with online forms, e-mail TEAS@uspto.gov.  For questions about the Office action itself, please contact the assigned trademark examining attorney.  E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

 

All informal e-mail communications relevant to this application will be placed in the official application record.

 

WHO MUST SIGN THE RESPONSE:  It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants).  If an applicant is represented by an attorney, the attorney must sign the response. 

 

PERIODICALLY CHECK THE STATUS OF THE APPLICATION:  To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  Please keep a copy of the TSDR status screen.  If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199.  For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

 

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS:  Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.

 

 

Offc Action Outgoing [image/jpeg]

Offc Action Outgoing [image/jpeg]


uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.

© 2024 USPTO.report | Privacy Policy | Resources | RSS Feed of Trademarks | Trademark Filings Twitter Feed