Offc Action Outgoing

STRICT DEADLINE TO RESPOND TO THIS NOTIFICATION: TO AVOID ABANDONMENT OF THE REQUEST FOR EXTENSION OF PROTECTION OF THE INTERNATIONAL REGISTRATION, THE USPTO MUST RECEIVE A COMPLETE RESPONSE TO THIS PROVISIONAL FULL REFUSAL NOTIFICATION WITHIN 6 MONTHS OF THE “DATE ON WHICH THE NOTIFICATION WAS SENT TO WIPO (MAILING DATE)” LOCATED ON THE WIPO COVER LETTER ACCOMPANYING THIS NOTIFICATION.

In addition to the Mailing Date appearing on the WIPO cover letter, a holder (hereafter “applicant”) may confirm this Mailing Date using the USPTO’s Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. To do so, enter the U.S. application serial number for this application and then select “Documents.” The Mailing Date used to calculate the response deadline for this provisional full refusal is the “Create/Mail Date” of the “IB-1rst Refusal Note.”

This is a PROVISIONAL FULL REFUSAL of the request for extension of protection of the mark in the above-referenced U.S. application. See 15 U.S.C. §1141h(c). See below in this notification (hereafter “Office action”) for details regarding the provisional full refusal.

The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issue(s) below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

SUMMARY OF ISSUES:

Identification of Goods
Mark Description Required

SEARCH RESULTS

The trademark examining attorney has searched the Office’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d). TMEP §704.02; see 15 U.S.C. §1052(d).

However, applicant must respond to the requirements set forth below.

IDENTIFICATION OF GOODS

The identification of goods must be amended because some of the wording is indefinite.

The wording “ Pneumatic or hydraulic machines and instruments” in the identification of goods is indefinite and must be clarified because the types of machines and instruments are unclear. See TMEP §1402.01. Applicant must specify the common commercial names of its machines and instruments, e.g., “pneumatic pumps,” “hydraulic conveyors.”

The wording “power distribution or control machines and apparatus” in the identification of goods is indefinite and must be clarified because it is unclear if these goods distribute and control electrical power. See TMEP §1402.01. Applicant must specify whether these goods distribute electrical power, or specify their common commercial names, e.g., “electrical power distribution units,” “power controllers.”

The wording “phase modifiers” in the identification of goods is indefinite and must be clarified because the nature and use of these goods is unclear. See TMEP §1402.01. Applicant may substitute the wording “phase shifters for communications apparatus,” if accurate.

The wording “ telecommunications devices, apparatus and instruments” and “electronic machines, apparatus and their parts” in the identification of goods is indefinite and must be clarified because the nature of these goods is unclear. See TMEP §1402.01. Applicant must specify the common commercial names of these goods, e.g., “telecommunications towers.”

To address the issues discussed above, applicant may adopt any or all of the following identification of goods, if accurate. Suggested changes are indicated in bold, strikethrough, and underlined fonts.

International Class 7:	Pneumatic or hydraulic machines and instruments, namely, {specify machines and instruments, e.g., pneumatic pumps, hydraulic conveyors}; starters for motors and engines; AC motors and DC motors, not including those for land vehicles; alternators; direct current generators; electric vacuum cleaners; electrically operated brushes, being parts of machines.

International Class 9:	Electrical power distribution or control machines and apparatus, namely, electrical power distribution units and power controllers; rotary converters; phase ~~modifiers~~ shifters for {{indicate, e.g., communications apparatus, etc., but do not indicate musical instruments}; electric wires and cables; telecommunications devices, apparatus and instruments, namely, {specify telecommunications goods, e.g., telecommunications towers}; electronic ~~machines, apparatus and their parts~~ {specify electronic goods, e.g., electronic book reader}; magnetic cores; resistance wires.

An applicant may only amend an identification to clarify or limit the goods and/or services, but not to add to or broaden the scope of the goods and/or services. 37 C.F.R. §2.71(a); see TMEP §1904.02(c)(iv). In an application filed under Trademark Act Section 66(a), the scope of the identification for purposes of permissible amendments is limited by the international class assigned by the International Bureau of the World Intellectual Property Organization (International Bureau). 37 C.F.R. §2.85(f); TMEP §§1402.07(a), 1904.02(c). If an applicant amends an identification to a class other than that assigned by the International Bureau, the amendment will not be accepted because it will exceed the scope and those goods and/or services will no longer have a basis for registration under U.S. law. TMEP §§1402.01(c), 1904.02(c).

In addition, in a Section 66(a) application, an applicant may not change the classification of goods and/or services from that assigned by the International Bureau in the corresponding international registration. 37 C.F.R. §2.85(d); TMEP §§1401.03(d), 1402.01(c). Further, in a multiple-class Section 66(a) application, an applicant may not transfer goods and/or services from one existing international class to another. 37 C.F.R. §2.85(d); TMEP §§1401.03(d), 1402.01(c).

For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual at http://tess2.gov.uspto.report/netahtml/tidm.html. See TMEP §1402.04.

MARK DESCRIPTION REQUIRED

Applicant must submit an accurate and concise description of the literal and design elements in the mark. 37 C.F.R. §2.37; see TMEP §§808.01, 808.02. The following is suggested, if accurate:

The mark consists of the wording “IG” in stylized font.

Assistance

If applicant has questions regarding this Office action, please telephone or e-mail the assigned trademark examining attorney. All relevant e-mail communications will be placed in the official application record; however, an e-mail communication will not be accepted as a response to this Office action and will not extend the deadline for filing a proper response. See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05. Further, although the trademark examining attorney may provide additional explanation pertaining to the refusal(s) and/or requirement(s) in this Office action, the trademark examining attorney may not provide legal advice or statements about applicant’s rights. See TMEP §§705.02, 709.06.

WHO IS PERMITTED TO RESPOND TO THIS PROVISIONAL FULL REFUSAL: Any response to this provisional refusal must be personally signed by an individual applicant, all joint applicants, or someone with legal authority to bind a juristic applicant (e.g., a corporate officer or general partner). 37 C.F.R. §§2.62(b), 2.193(e)(2)(ii); TMEP §712.01. If applicant hires a qualified U.S. attorney to respond on his or her behalf, then the attorney must sign the response. 37 C.F.R. §§2.193(e)(2)(i), 11.18(a); TMEP §§611.03(b), 712.01. Qualified U.S. attorneys include those in good standing with a bar of the highest court of any U.S. state, the District of Columbia, Puerto Rico, and other U.S. commonwealths or U.S. territories. See 37 C.F.R. §§2.17(a), 2.62(b), 11.1, 11.14(a); TMEP §§602, 712.01. Additionally, for all responses, the proper signatory must personally sign the document or personally enter his or her electronic signature on the electronic filing. See 37 C.F.R. §2.193(a); TMEP §§611.01(b), 611.02. The name of the signatory must also be printed or typed immediately below or adjacent to the signature, or identified elsewhere in the filing. 37 C.F.R. §2.193(d); TMEP §611.01(b).

In general, foreign attorneys are not permitted to represent applicants before the USPTO (e.g., file written communications, authorize an amendment to an application, or submit legal arguments in response to a requirement or refusal). See 37 C.F.R. §11.14(c), (e); TMEP §§602.03-.03(b), 608.01.

DESIGNATION OF DOMESTIC REPRESENTATIVE: The USPTO encourages applicants who do not reside in the United States to designate a domestic representative upon whom any notice or process may be served. TMEP §610; see 15 U.S.C. §§1051(e), 1141h(d); 37 C.F.R. §2.24(a)(1)-(2). Such designations may be filed online at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp

/April Reeves/

April E. Reeves

Examining Attorney

Law Office 102

(571) 272-3681

april.reeves@uspto.gov

TO RESPOND TO THIS LETTER: Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp. Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application. For technical assistance with online forms, e-mail TEAS@uspto.gov. For questions about the Office action itself, please contact the assigned trademark examining attorney. E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

All informal e-mail communications relevant to this application will be placed in the official application record.

WHO MUST SIGN THE RESPONSE: It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants). If an applicant is represented by an attorney, the attorney must sign the response.

PERIODICALLY CHECK THE STATUS OF THE APPLICATION: To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. Please keep a copy of the TSDR status screen. If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199. For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS: Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.