UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)
OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION
U.S. APPLICATION SERIAL NO. 79151571
MARK: FORCE
|
|
CORRESPONDENT ADDRESS: |
CLICK HERE TO RESPOND TO THIS LETTER: http://www.gov.uspto.report/trademarks/teas/response_forms.jsp
|
APPLICANT: Oerlikon Textile GmbH & Co. KG
|
|
CORRESPONDENT’S REFERENCE/DOCKET NO: CORRESPONDENT E-MAIL ADDRESS: |
|
OFFICE ACTION
INTERNATIONAL REGISTRATION NO. 1214859
STRICT DEADLINE TO RESPOND TO THIS NOTIFICATION: TO AVOID ABANDONMENT OF THE REQUEST FOR EXTENSION OF PROTECTION OF THE INTERNATIONAL REGISTRATION, THE USPTO MUST RECEIVE A COMPLETE RESPONSE TO THIS PROVISIONAL FULL REFUSAL NOTIFICATION WITHIN 6 MONTHS OF THE “DATE ON WHICH THE NOTIFICATION WAS SENT TO WIPO (MAILING DATE)” LOCATED ON THE WIPO COVER LETTER ACCOMPANYING THIS NOTIFICATION.
In addition to the Mailing Date appearing on the WIPO cover letter, a holder (hereafter “applicant”) may confirm this Mailing Date using the USPTO’s Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. To do so, enter the U.S. application serial number for this application and then select “Documents.” The Mailing Date used to calculate the response deadline for this provisional full refusal is the “Create/Mail Date” of the “IB-1rst Refusal Note.”
This is a PROVISIONAL FULL REFUSAL of the request for extension of protection of the mark in the above-referenced U.S. application. See 15 U.S.C. §1141h(c). See below in this notification (hereafter “Office action”) for details regarding the provisional full refusal.
SUMMARY OF ISSUES that applicant must address:
ENTITY & COUNTRY OF ORGANIZTION/INCORPORATION
Acceptable entity types include an individual, a partnership, a corporation, a joint venture, or the foreign equivalent. See 37 C.F.R. §2.32(a)(3)(i)-(ii); TMEP §§803.03 et seq.
If applicant’s entity type is an individual, applicant must indicate his or her national citizenship for the record. See 37 C.F.R. §2.32(a)(3)(i); TMEP §803.04. If applicant’s entity type is a corporation, association, partnership, joint venture, or the foreign equivalent, applicant must set forth the foreign country under whose laws applicant is organized or incorporated. 37 C.F.R. §2.32(a)(3)(ii); TMEP §§803.03(b)-(c), 803.04. For an association, applicant must also specify whether the association is incorporated or unincorporated, unless the foreign country and the designation or description “association/associazione” appear in Appendix D of the Trademark Manual of Examining Procedure (TMEP). TMEP §803.03(c).
If applicant is organized under the laws of a foreign province or geographical region, applicant should specify both the foreign province or geographical region and the foreign country in which the province or region is located. See TMEP §803.04. To provide this information online via the Trademark Electronic Application System (TEAS) response form, applicant must (1) locate the “Entity Type” heading and select “Other;” (2) locate the “Specify Entity Type” heading and select “Other” under the Foreign Entity option, and enter in the free-text field below both applicant’s entity type and the foreign province or geographical region of its organization (e.g., partnership of Victoria); and (3) locate the “State or Country Where Legally Organized” heading and select the appropriate foreign country (e.g., Australia) under the Non-U.S. Entity option. See id.
If accurate, “GmbH & Co. KG” and “FED REP GERMANY” would be acceptable.
Applicant may substitute the following wording, if accurate:
Class 7
Melt-spinning machinery for the production of yarns, fibers or tows made of thermoplastics and parts of such machinery, in particular raw material storage containers, raw materials dryers, extruders, mixers, spinning pumps, spinnerets, and spin finish units all sold as a unit; storage machinery for deposit of tows made of thermoplastics and parts of such machinery, namely, reels, can traversing units, cans, can conveyors all sold as a unit; drawing machinery for conveying and guiding threads, fibers or tows and parts of such machinery, namely, delivery units, draw rollers, godets all sold as a unit; stretching machinery for stretching of threads, fibers, or tow and parts of such machinery, namely, stretching units, godets, heaters for draw rollers and godets all sold as a unit; stuffer box crimping machinery for crimping of yarns, fibers or tows made of thermoplastics and parts of such machinery, namely, crimping rollers all sold as a unit; fiber cutting machinery for cutting threads, fibers or tows made of thermoplastics and parts of such machinery all sold as a unit; baling press machinery for pressing cut staple fibers and parts of such machinery all sold as a unit; metal working machinery installations comprised of melt spinning machinery, drawing machinery, stretching machinery, stuffer box crimping machinery, fiber cutting machinery and baling press machinery for the production of cut staple fibers; metal working machinery installations comprised of drawing machinery, stretching machinery, stuffer box crimping machinery, fiber cutting machinery and baling press machinery for the production of cut staple fibers
In addition, in a Section 66(a) application, an applicant may not change the classification of goods and/or services from that assigned by the International Bureau in the corresponding international registration. 37 C.F.R. §2.85(d); TMEP §§1401.03(d), 1402.01(c). Further, in a multiple-class Section 66(a) application, an applicant may not transfer goods and/or services from one existing international class to another. 37 C.F.R. §2.85(d); TMEP §§1401.03(d), 1402.01(c).
For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual at http://tess2.gov.uspto.report/netahtml/tidm.html. See TMEP §1402.04.
If applicant does not respond to this Office action within six months of the date on which the USPTO sends this Office action to the International Bureau, or responds by expressly abandoning the application, the application process will end, the trademark will fail to register, and the application fee will not be refunded. See 15 U.S.C. §1062(b); 37 C.F.R. §§2.65(a), 2.68(a), 2.209(a); TMEP §§711, 718.01, 718.02. Where the application has been abandoned for failure to respond to an Office action, applicant’s only option would be to file a timely petition to revive the application, which, if granted, would allow the application to return to active status. See 37 C.F.R. §2.66; TMEP §1714. There is a $100 fee for such petitions. See 37 C.F.R. §§2.6, 2.66(b)(1).
WHO IS PERMITTED TO RESPOND TO THIS PROVISIONAL FULL REFUSAL: Any response to this provisional refusal must be personally signed by an individual applicant, all joint applicants, or someone with legal authority to bind a juristic applicant (e.g., a corporate officer or general partner). 37 C.F.R. §§2.62(b), 2.193(e)(2)(ii); TMEP §712.01. If applicant hires a qualified U.S. attorney to respond on his or her behalf, then the attorney must sign the response. 37 C.F.R. §§2.193(e)(2)(i), 11.18(a); TMEP §§611.03(b), 712.01. Qualified U.S. attorneys include those in good standing with a bar of the highest court of any U.S. state, the District of Columbia, Puerto Rico, and other federal territories and possessions of the United States. See 37 C.F.R. §§2.17(a), 2.62(b), 11.1, 11.14(a); TMEP §§602, 712.01. Additionally, for all responses, the proper signatory must personally sign the document or personally enter his or her electronic signature on the electronic filing. See 37 C.F.R. §2.193(a); TMEP §§611.01(b), 611.02. The name of the signatory must also be printed or typed immediately below or adjacent to the signature, or identified elsewhere in the filing. 37 C.F.R. §2.193(d); TMEP §611.01(b).
In general, foreign attorneys are not permitted to represent applicants before the USPTO (e.g., file written communications, authorize an amendment to an application, or submit legal arguments in response to a requirement or refusal). See 37 C.F.R. §11.14(c), (e); TMEP §§602.03-.03(b), 608.01.
DESIGNATION OF DOMESTIC REPRESENTATIVE: The USPTO encourages applicants who do not reside in the United States to designate a domestic representative upon whom any notice or process may be served. TMEP §610; see 15 U.S.C. §§1051(e), 1141h(d); 37 C.F.R. §2.24(a)(1)-(2). Such designations may be filed online at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.
/Samuel R. Paquin/
Trademark Examining Attorney
Law Office 101
(571) 272-2514
samuel.paquin@uspto.gov
TO RESPOND TO THIS LETTER: Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp. Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application. For technical assistance with online forms, e-mail TEAS@uspto.gov. For questions about the Office action itself, please contact the assigned trademark examining attorney. E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.
All informal e-mail communications relevant to this application will be placed in the official application record.
WHO MUST SIGN THE RESPONSE: It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants). If an applicant is represented by an attorney, the attorney must sign the response.
PERIODICALLY CHECK THE STATUS OF THE APPLICATION: To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. Please keep a copy of the TSDR status screen. If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199. For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.
TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS: Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.