X
Nelson Stud Welding, Inc.
| Research |
OneLook
Acronym Finder
|
| Serial Number | 78768111 |
| Mark Drawing Code | 4000: Illustration: Drawing with word(s)/letter(s)/number(s) in Block form |
| Attorney Name | Kevin S. MacKenzie |
| Attorney Docket Number | NSW-17619/50 |
| Law Office Assigned | M10 |
| Employee Name | FINE, STEVEN R |
Timeline
| 2005-12-07 | Application Filed |
| 2005-12-07 | Date of First Use |
| 2007-07-19 | Abandon |
| 2007-08-24 | Location: TMO LAW OFFICE 110 - EXAMINING ATTORNEY ASSIGNED |
| 2007-08-24 | Status: Dead/Abandoned |
| 2018-07-08 | Transaction Date |
Trademark Applicants & Owners
| Owner: |  Nelson Stud Welding, Inc. |
| Address | P.O. Box 4019 7900 West Ridge Road Elyria DE 440362019 |
| Legal Entity Type | Corporation |
| Legal Entity State | DE |
Documents
Click the blue "Refresh" button to load certificates, specimines, application, and other documents.
Attorney of Record
Good, Services, and Codes
| International Codes: | 6 |
| U.S. Codes: | 002,012,013,014,023,025,050 |
| Type Code | Type |
|---|---|
| GS0061 | Metal weldable studs and metal fasteners, namely, steel fasteners, metal studs and bolts, weld studs, welded bolts, stud fasteners, shear connectors, headed anchors, welded headed anchors, welded deformed bar anchors, reinforcing bars and studs, concrete anchors, concrete anchor studs, deformed bar anchor studs, externally threaded fasteners, internally threaded fasteners, punching shear resistor (PSR) studs, inserts, ports, pipe hangers, cable hangers, bosses, steel bolts, tension bolts, nuts, sheet metal brackets, grounding studs, plastic cap ground studs, metal nut ground studs, fir-tree studs, coarse threaded studs, wide top wide flange studs, trim studs, collar studs, full base and reduced base studs, cold formed engineered components, cold formed net shapes, cold formed eccentric or asymmetric parts, anti-skid studs, wear protection studs, anti-corrosion studs, refractory anchors and insulation studs, capacitor discharge (CD) studs, rectangular studs, round corner square studs, eyebolt and J bolt studs; Metal ferrules, namely, ferrules for welding at an angle to a base plate, welding to curved surfaces, welding to edges of base plates, welding into fillets and onto heels, rectangular ferrules, welding to vertical surfaces, welding through metal deck, refractory anchor ferrules, special application ferrules, stand ferrules |
Trademark Filing History
| Description | Date | Event Coding |
|---|---|---|
| NEW APPLICATION ENTERED IN TRAM | 2005-12-13 | 1 NWAP I:Incoming Correspondence |
| ASSIGNED TO EXAMINER | 2006-06-08 | 2 DOCK D:Assigned to Examiner |
| NON-FINAL ACTION WRITTEN | 2006-06-18 | 3 CNRT R:Renewal |
| NON-FINAL ACTION MAILED | 2006-06-19 | 4 CNRT F:First Action |
| TEAS RESPONSE TO OFFICE ACTION RECEIVED | 2006-12-19 | 5 TROA I:Incoming Correspondence |
| CORRESPONDENCE RECEIVED IN LAW OFFICE | 2006-12-19 | 6 CRFA I:Incoming Correspondence |
| TEAS/EMAIL CORRESPONDENCE ENTERED | 2006-12-20 | 7 TEME I:Incoming Correspondence |
| NON-FINAL ACTION WRITTEN | 2007-01-18 | 8 CNRT R:Renewal |
| NON-FINAL ACTION MAILED | 2007-01-18 | 9 CNRT O:Outgoing Correspondence |
| ABANDONMENT - FAILURE TO RESPOND OR LATE RESPONSE | 2007-08-24 | 10 ABN2 O:Outgoing Correspondence |
| ABANDONMENT NOTICE MAILED - FAILURE TO RESPOND | 2007-08-24 | 11 MAB2 O:Outgoing Correspondence |
Similar Marks
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.
| 