Offc Action Outgoing

BLINK

SATCO PRODUCTS, INC.

Offc Action Outgoing

UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION

 

    U.S. APPLICATION SERIAL NO.           76716125

 

    MARK: BLINK

 

 

        

*76716125*

    CORRESPONDENT ADDRESS:

          PHILIP M. WEISS

          Weiss & Weiss

          410 JERICHO TPKE STE 105

          JERICHO, NY 11753-1318

          

 

CLICK HERE TO RESPOND TO THIS LETTER:

http://www.gov.uspto.report/trademarks/teas/response_forms.jsp

 

 

 

    APPLICANT: SATCO PRODUCTS, INC.

 

 

 

    CORRESPONDENT’S REFERENCE/DOCKET NO:  

          T/8-93

    CORRESPONDENT E-MAIL ADDRESS: 

          

 

 

 

OFFICE ACTION

 

STRICT DEADLINE TO RESPOND TO THIS LETTER

TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.

 

ISSUE/MAILING DATE:

 

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issue(s) below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62, 2.65(a); TMEP §§711, 718.03.

 

The applicant must address the following issues:

  • Section 2(d) refusal
  • Identification of goods requirement
  • Request for information requirement

 

SUBSTANTIVE REFUSAL

Section 2(d) Refusal – Likelihood of Confusion

Registration of the applied-for mark is refused because of a likelihood of confusion with the mark in U.S. Registration No. 4248699.  Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq.  See the enclosed registration.

 

The applicant has applied to register BLINK for Class 011:  “LED flush mount lighting fixtures and LED retrofit lighting kits.”

 

The registered mark is BLINKY for Class 011:  “Lighting fixtures; lighting replacement fixtures; lighting retrofit and conversion kits, comprised of the main lighting fixture unit, sensor, and night-light lamp.”

 

Trademark Act Section 2(d) bars registration of an applied-for mark that so resembles a registered mark that it is likely that a potential consumer would be confused, mistaken, or deceived as to the source of the goods and/or services of the applicant and registrant.  See 15 U.S.C. §1052(d).  In the seminal decision In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 177 USPQ 563 (C.C.P.A. 1973), the court listed the principal factors to be considered when determining whether there is a likelihood of confusion under Section 2(d).  See TMEP §1207.01.  However, not all the factors are necessarily relevant or of equal weight, and any one of the factors may control in a given case, depending upon the evidence of record.  Citigroup Inc. v. Capital City Bank Grp., Inc., 637 F.3d 1344, 1355, 98 USPQ2d 1253, 1260 (Fed. Cir. 2011); In re Majestic Distilling Co., 315 F.3d 1311, 1315, 65 USPQ2d 1201, 1204 (Fed. Cir. 2003); see In re E. I. du Pont de Nemours & Co., 476 F.2d at 1361-62, 177 USPQ at 567.

 

In this case, the following factors are the most relevant:  similarity of the marks, similarity and nature of the goods and/or services, and similarity of the trade channels of the goods and/or services.  See In re Viterra Inc., 671 F.3d 1358, 1361-62, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012); In re Dakin’s Miniatures Inc., 59 USPQ2d 1593, 1595-96 (TTAB 1999); TMEP §§1207.01 et seq.

 

Taking into account the relevant du Pont factors, a likelihood of confusion determination in this case involves a two-part analysis.  See In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361-62, 177 USPQ 563, 567 (C.C.P.A. 1973); In re 1st USA Realty Prof’ls Inc., 84 USPQ2d 1581, 1584 (TTAB 2007); see also In re Dixie Rests. Inc., 105 F.3d 1405, 1406-07, 41 USPQ2d 1531, 1533 (Fed. Cir. 1997).  The marks are compared for similarities in their appearance, sound, connotation and commercial impression.  TMEP §§1207.01, 1207.01(b).  The goods and/or services are compared to determine whether they are similar or commercially related or travel in the same trade channels.  See Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1164-65, 64 USPQ2d 1375, 1380 (Fed. Cir. 2002); Han Beauty, Inc. v. Alberto-Culver Co., 236 F.3d 1333, 1336, 57 USPQ2d 1557, 1559 (Fed. Cir. 2001); TMEP §§1207.01, 1207.01(a)(vi).

 

Comparison of the Marks

 

Marks are compared in their entireties for similarities in appearance, sound, connotation, and commercial impression.  In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973)); TMEP §1207.01(b)-(b)(v).  Similarity in any one of these elements may be sufficient to find the marks confusingly similar.  In re White Swan Ltd., 8 USPQ2d 1534, 1535 (TTAB 1988); see In re 1st USA Realty Prof’ls, Inc., 84 USPQ2d 1581, 1586 (TTAB 2007); TMEP §1207.01(b).

 

In the present case, applicant’s mark BLINK is similar to the registered mark BLINKY in sound, appearance, and connotation.  First, both marks are similar in appearance as they begin with BLINK.  Applicant has merely deleted the “Y” from the registrant’s mark.  Consumers are generally more inclined to focus on the first word, prefix, or syllable in any trademark or service mark.  See Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F. 3d 1369, 1372, 73 USPQ2d 1689, 1692 (Fed. Cir. 2005); Presto Prods., Inc. v. Nice-Pak Prods., Inc., 9 USPQ2d 1895, 1897 (TTAB 1988) (“it is often the first part of a mark which is most likely to be impressed upon the mind of a purchaser and remembered” when making purchasing decisions).

 

Overall, the marks have the same commercial impression.  

 

Comparison of Goods

 

The goods and/or services of the parties need not be identical or even competitive to find a likelihood of confusion.  See On-line Careline Inc. v. Am. Online Inc., 229 F.3d 1080, 1086, 56 USPQ2d 1471, 1475 (Fed. Cir. 2000); Recot, Inc. v. Becton, 214 F.3d 1322, 1329, 54 USPQ2d 1894, 1898 (Fed. Cir. 2000) (“[E]ven if the goods in question are different from, and thus not related to, one another in kind, the same goods can be related in the mind of the consuming public as to the origin of the goods.”); TMEP §1207.01(a)(i). 

 

The respective goods and/or services need only be “related in some manner and/or if the circumstances surrounding their marketing [be] such that they could give rise to the mistaken belief that [the goods and/or services] emanate from the same source.”  Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369, 101 USPQ2d 1713, 1722 (Fed. Cir. 2012) (quoting 7-Eleven Inc. v. Wechsler, 83 USPQ2d 1715, 1724 (TTAB 2007)); Gen. Mills Inc. v. Fage Dairy Processing Indus. SA, 100 USPQ2d 1584, 1597 (TTAB 2011); TMEP §1207.01(a)(i).

 

In the present case, applicant’s “LED flush mount lighting fixtures and LED retrofit lighting kits” are related to registrant’s “lighting fixtures; lighting replacement fixtures; lighting retrofit and conversion kits, comprised of the main lighting fixture unit, sensor, and night-light lamp” because the goods are the type sold to consumers seeking various types of lighting fixtures and retrofit fixtures.  With respect to applicant’s and registrant’s goods and/or services, the question of likelihood of confusion is determined based on the description of the goods and/or services stated in the application and registration at issue, not on extrinsic evidence of actual use.  See, e.g., Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369-70, 101 USPQ2d 1713, 1722 (Fed. Cir. 2012); Octocom Sys. Inc. v. Hous. Computers Servs. Inc., 918 F.2d 937, 942, 16 USPQ2d 1783, 1787 (Fed. Cir. 1990). 

 

Absent restrictions in an application and/or registration, the identified goods and/or services are “presumed to travel in the same channels of trade to the same class of purchasers.”  In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1268, 62 USPQ2d 1001, 1005 (Fed. Cir. 2002)).  Additionally, unrestricted and broad identifications are presumed to encompass all goods and/or services of the type described.  See In re Jump Designs, LLC, 80 USPQ2d 1370, 1374 (TTAB 2006) (citing In re Elbaum, 211 USPQ 639, 640 (TTAB 1981)); In re Linkvest S.A., 24 USPQ2d 1716, 1716 (TTAB 1992). 

 

In this case, the identification set forth in the application and registration(s) has no restrictions as to nature, type, channels of trade, or classes of purchasers.  Therefore, it is presumed that these goods and/or services travel in all normal channels of trade, and are available to the same class of purchasers.  Further, the registration uses broad wording to describe the goods and/or services and this wording is presumed to encompass all goods and/or services of the type described, including those in applicant’s more narrow identification.

 

Accordingly, the goods and/or services would be sold to the same class of purchasers and encountered under circumstances leading one to mistakenly believe the goods and/or services originate from the same source. 

 

Since the marks are similar and the goods and/or services are related, there is a likelihood of confusion as to the source of the applicant’s goods and/or services.  Therefore, applicant’s mark is not entitled to registration.

 

Although applicant’s mark has been refused registration, applicant may respond to the refusal(s) by submitting evidence and arguments in support of registration.

 

If applicant responds to the refusal(s), applicant must also respond to the requirement(s) set forth below.

 

PROCEDURAL ISSUES

 

Identification of Goods Requirement

 

International Class 011: Applicant has identified the goods and/or services as “LED flush mount lighting fixtures and LED retrofit lighting kits.”

 

The wording “lighting kits” in the identification of goods is indefinite and must be clarified.  See TMEP §§1401.05(a), 1402.01, 1402.03.  Kits consist of a group of items that (1) share a common theme, or (2) are used to make a particular product.  See TMEP §1401.05(a).  The type of kits and the principal components will determine classification.  See id.  Therefore, applicant must amend the identification to identify more clearly the type of kits and the principal components, so as to determine the appropriate classification, using the guidelines below.  See id.

 

For kits consisting of a group of items that share a common theme, the identification should specify the theme followed by the word “comprising” and a list of the items that make up the kit, setting forth the most dominant items first.  Generally, the international class of the kit will be determined by the international class of the majority of items in the kit.  For example, “nail care kits comprising nail polish, emery boards, cotton balls for cosmetic purposes and nail clippers” are in International Class 3 because this is the international class of a majority of the items (with the only item not in International Class 3 being “nail clippers,” which is in International Class 8).

 

If no items in a shared-theme kit are more dominant than any other item, the international class for the kit itself will be determined by the first-listed item after the wording “comprising.”  For example, “baking kits comprising baking pan and cake mix” are in International Class 21 (the class for “baking pans”), and “baking kits comprising cake mix and baking pan” are in International Class 30 (the class for “cake mixes”).

 

For kits that make a particular product, the identification must specify the product being made using the following format:  “kits for making [specify item].”  Generally, the international class for this type of kit will be determined by the international class of the product being made.  For example, “kits for making bird feeders” are in International Class 21 (the class for “bird feeders”), and “kits for making clocks” are in International Class 14 (the class for “clocks”).

 

An exception to the above guidelines is kits identified as “hobby craft kits,” which are classified in International Class 28 regardless of the items comprising the kit or the product made by the kit.  An identification for these kits must either list the items in the kit after the word “comprising” (e.g., “hobby craft kits comprising wood panels, paint, paintbrushes, nails) or specify the product being made (e.g., “hobby craft kits for making bird feeders”).

 

Applicant may adopt the following identification, if accurate. 

 

·         Class 011:  LED flush mount lighting fixtures and LED retrofit lighting kits comprising LED light bulbs, lighting fixtures, power supplies, and wiring.

 

For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual at http://tess2.gov.uspto.report/netahtml/tidm.html.  See TMEP §1402.04.

 

Although identifications of goods and/or services may be amended to clarify or limit the goods and/or services, adding to or broadening the scope of the goods and/or services is not permitted.  37 C.F.R. §2.71(a); see TMEP §§1402.06 et seq., 1402.07.  Therefore, applicant may not amend the identification to include goods and/or services that are not within the scope of the goods and/or services set forth in the present identification.

 

Request for Information Requirement

 

The nature of the goods on which applicant intends to use its mark is not clear from the present record and additional information is required.  An applicant can be required to provide more information if it is necessary for proper examination of the application.  37 C.F.R. §2.61(b); TMEP §§814, 1402.01(e); see In re AOP LLC, 107 USPQ2d 1644, 1650-51 (TTAB 2013); In re Cheezwhse.com, Inc., 85 USPQ2d 1917, 1919 (TTAB 2008); In re DTI P’ship LLP, 67 USPQ2d 1699, 1701-02 (TTAB 2003).

 

Therefore, applicant must submit samples of advertisements or promotional materials and/or a photograph of the identified goods.  If such materials are not available, applicant must submit samples of advertisements or promotional materials and a photograph of similar goods.  In addition, applicant must describe in detail the nature, purpose, and channels of trade of the goods.  Specifically, the applicant must provide information regarding the nature of the products and whether they provide for intermittent lighting. 

 

Failure to comply with a request for information can be grounds for refusing registration.  In re AOP LLC, 107 USPQ2d at 1651; In re DTI P’ship LLP, 67 USPQ2d at 1701-02; TMEP §814.

 

RESPONSE GUIDELINES

 

Applicant should include the following information on all correspondence with the Office:  (1) the name and law office number of the trademark examining attorney, (2) the serial number and filing date of the application, (3) the date of issuance of this Office action, (4) applicant’s name, address, telephone number and e-mail address (if applicable), and (5) the mark.  37 C.F.R. §2.194(b)(1); TMEP §302.03(a).

 

If applicant has questions regarding this Office action, please telephone or e-mail the assigned trademark examining attorney.  All relevant e-mail communications will be placed in the official application record; however, an e-mail communication will not be accepted as a response to this Office action and will not extend the deadline for filing a proper response.  See 37 C.F.R. §2.191; TMEP §§304.01-.02, 709.04-.05.  Further, although the trademark examining attorney may provide additional explanation pertaining to the refusal(s) and/or requirement(s) in this Office action, the trademark examining attorney may not provide legal advice or statements about applicant’s rights.  See TMEP §§705.02, 709.06.

 

/mvaghani/

Mayur Vaghani

Examining Attorney

Law Office 102

Phone: (571) 272-1615

Fax: (571) 273-9102

mayur.vaghani@uspto.gov

 

 

TO RESPOND TO THIS LETTER:  Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.  Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application.  For technical assistance with online forms, e-mail TEAS@uspto.gov.  For questions about the Office action itself, please contact the assigned trademark examining attorney.  E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

 

All informal e-mail communications relevant to this application will be placed in the official application record.

 

WHO MUST SIGN THE RESPONSE:  It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants).  If an applicant is represented by an attorney, the attorney must sign the response. 

 

PERIODICALLY CHECK THE STATUS OF THE APPLICATION:  To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  Please keep a copy of the TSDR status screen.  If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199.  For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

 

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS:  Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.

 

 

Offc Action Outgoing [image/jpeg]

Offc Action Outgoing [image/jpeg]


uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.

© 2024 USPTO.report | Privacy Policy | Resources | RSS Feed of Trademarks | Trademark Filings Twitter Feed