Offc Action Outgoing

TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.

ISSUE/MAILING DATE:

The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issue(s) below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62, 2.65(a); TMEP §§711, 718.03.

The trademark examining attorney has searched the Office’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d). TMEP §704.02; see 15 U.S.C. §1052(d).

The applicant must address the following issues:

Identification of goods requirement
Mark matching requirement

PROCEDURAL ISSUES

Identification of Goods Requirement

International Class 007: Applicant has identified the goods and/or services as “machines using laser stations; laser cutting machines; machine apparatus and devices for material processing with the use of lasers, namely, cutting, etching, inscribing, marking, engraving and drilling processes; and tooling and components for such machines.”

The wording “machines using laser stations,” “machine apparatus and devices for material processing with the use of lasers, namely, cutting, etching, inscribing, marking, engraving and drilling processes,” and “tooling and components for such machines” is indefinite and must be clarified because the nature and type of good must be specified by common commercial name. See TMEP §1402.01.

Applicant may adopt the following identification, if accurate:

· Class 007: Machines using laser stations, namely, {specify type, e.g., laser engraving machines, laser welding machines, etc.}; laser cutting machines; machine apparatus and devices for material processing with the use of lasers, namely, {specify type, e.g., Laser machines for cutting, marking, and engraving fabric designed for installation directly above embroidery machines, laser engraving machines, etc.} for use in cutting, etching, inscribing, marking, engraving and drilling processes; and tooling and components for such machines, namely, {specify type by common commercial name in Class 007}

For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual at http://tess2.gov.uspto.report/netahtml/tidm.html. See TMEP §1402.04.

Although identifications of goods and/or services may be amended to clarify or limit the goods and/or services, adding to or broadening the scope of the goods and/or services is not permitted. 37 C.F.R. §2.71(a); see TMEP §§1402.06 et seq., 1402.07. Therefore, applicant may not amend the identification to include goods and/or services that are not within the scope of the goods and/or services set forth in the present identification.

Mark Matching Requirement

Registration is refused because the specimen does not show the applied-for mark in the drawing in use in commerce. 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a). Specifically, the specimen displays the mark as RAYDIANCE R-TUBE SOLUTION; however, the drawing displays the mark as R-TUBE.

The drawing shows the mark sought to be registered, and must be a substantially exact representation of the mark as used on or in connection with the goods and/or services, as shown by the specimen. 37 C.F.R. §2.51(a); TMEP §807.12(a). Because the mark in the drawing is not a substantially exact representation of the mark on the specimen, applicant has failed to provide the required evidence of use of the applied-for mark in commerce on or in connection with applicant’s goods and/or services. See TMEP §807.12(a).

An application based on Trademark Act Section 1(a) must include a specimen showing the applied-for mark in use in commerce for each international class of goods and/or services identified in the application or amendment to allege use. 15 U.S.C. §1051(a)(1); 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a).

Examples of specimens for goods may include tags, labels, instruction manuals, containers, and photographs that show the mark on the actual goods or packaging, or displays associated with the actual goods at their point of sale. See TMEP §§904.03 et seq. Webpages may also be specimens for goods when they include a picture or textual description of the goods associated with the mark and the means to order the goods. TMEP §904.03(i). Examples of specimens for services may include advertising and marketing materials, brochures, photographs of business signage and billboards, and website printouts that show the mark used in the actual sale, rendering, or advertising of the services. See TMEP §§1301.04 et seq.

Regarding whether applicant may submit an amended drawing in response to this refusal, applicant is advised that the drawing of a mark can be amended only if the amendment does not materially alter the mark as originally filed. 37 C.F.R. §2.72(a)(2); see TMEP §§807.12(a), 807.14 et seq. In this case, amending the mark in the drawing to conform to the mark on the specimen would be a material alteration and would not be accepted, because the difference between the mark in the specimen and the drawing is significant and each mark creates a different commercial impression. Specifically, the terms RAYDIANCE and SOLUTIONS create a difference commercial impression and indicate the goods create a radiant or brilliant product.

Applicant may respond to this refusal by satisfying one of the following:

(1) Submit a different specimen (a verified “substitute” specimen) that (a) was in actual use in commerce at least as early as the filing date of the application or prior to the filing of an amendment to allege use and (b) shows the applied-for mark in actual use in commerce for the goods and/or services identified in the application.

(2) Amend the filing basis to intent to use under Section 1(b), for which no specimen is required. This option will later necessitate additional fee(s) and filing requirements such as providing a specimen at a subsequent date.

For an overview of both response options referenced above and instructions on how to satisfy either option online using the Trademark Electronic Application System (TEAS) form, please go to http://www.gov.uspto.report/trademarks/law/J3_1.jsp.

RESPONSE GUIDELINES

Applicant should include the following information on all correspondence with the Office: (1) the name and law office number of the trademark examining attorney, (2) the serial number and filing date of the application, (3) the date of issuance of this Office action, (4) applicant’s name, address, telephone number and e-mail address (if applicable), and (5) the mark. 37 C.F.R. §2.194(b)(1); TMEP §302.03(a).

If applicant has questions regarding this Office action, please telephone or e-mail the assigned trademark examining attorney. All relevant e-mail communications will be placed in the official application record; however, an e-mail communication will not be accepted as a response to this Office action and will not extend the deadline for filing a proper response. See 37 C.F.R. §2.191; TMEP §§304.01-.02, 709.04-.05. Fur ther, although the trademark examining attorney may provide additional explanation pertaining to the refusal(s) and/or requirement(s) in this Office action, the trademark examining attorney may not provide legal advice or statements about applicant’s rights. See TMEP §§705.02, 709.06.

/mvaghani/

Mayur Vaghani

Examining Attorney

Law Office 102

Phone: (571) 272-1615

Fax: (571) 273-9102

mayur.vaghani@uspto.gov

TO RESPOND TO THIS LETTER: Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp. Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application. For technical assistance with online forms, e-mail TEAS@uspto.gov. For questions about the Office action itself, please contact the assigned trademark examining attorney. E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

All informal e-mail communications relevant to this application will be placed in the official application record.

WHO MUST SIGN THE RESPONSE: It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants). If an applicant is represented by an attorney, the attorney must sign the response.

PERIODICALLY CHECK THE STATUS OF THE APPLICATION: To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. Please keep a copy of the TSDR status screen. If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199. For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS: Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.