Offc Action Outgoing

TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.

ISSUE/MAILING DATE:

The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issue(s) below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

Mark Description

Applicant must submit an accurate and concise description of the literal and design elements in the mark. 37 C.F.R. §2.37; see TMEP §§808.01, 808.02. The following is suggested, if accurate:

The mark consists of a stylized letter "m," shaped with a partial rectangle shape on the left connected to a partial oval shape on the right. The inner portion of the oval shape has an indentation.

Drawing

The drawing is not acceptable because it will not create a high quality image when reproduced. See TMEP §807.04(a). Specifically, the drawing shows significant distortion within the design. Portions of the design appear light or shaded.

A clear drawing of the mark is an application requirement. 37 C.F.R. §2.52. Therefore, applicant must submit a new drawing showing a clear depiction of the mark. All lines must be clean, sharp and solid, and not fine or crowded. 37 C.F.R. §§2.53(c), 2.54(e); TMEP §§807.05(c), 807.06(a).

To submit a new drawing via the Trademark Electronic Application System (TEAS), applicant must use the response form and follow the instructions regarding submission of a drawing. TMEP §807.05(a); see 37 C.F.R. §2.53(a). An applicant must submit a drawing via TEAS in jpg format, and the USPTO recommends a digitized image with a length and width no smaller than 250 pixels and no larger than 944 pixels. 37 C.F.R. §2.53(c); TMEP §807.05(c).

For drawings submitted on paper, the paper should be approximately 8.5 inches wide by 11 inches long, white, non-shiny, and include the caption “DRAWING PAGE” at the top. 37 C.F.R. §2.54(a)-(c); TMEP §807.06(a). The mark in the drawing must appear no larger than 3.15 inches (8 cm) high by 3.15 inches (8 cm) wide. 37 C.F.R. §2.54(b); TMEP §807.06(a). Further, the drawing must be made with ink or by a process that will provide a high definition when scanned. 37 C.F.R. §2.54(e); TMEP §807.06(a). A photolithographic, printer’s proof copy, or other high-quality reproduction of the mark may be used. 37 C.F.R. §2.54(e); TMEP §807.06(a).

The USPTO will not accept amendments or changes to the applied-for mark shown in a new drawing if the changes would materially alter the mark. 37 C.F.R. §2.72; see TMEP §§807.13 et seq., 807.14.

Specimen – Class 9

The specimen does not show the applied-for mark used in connection with any of the goods and/or services specified in Class 9, and therefore is not acceptable. An application based on Trademark Act Section 1(a) must include a specimen showing the applied-for mark in use in commerce for each international class of goods and/or services identified in the application. Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a).

In this case, the specimen consists of images of textile machinery and what appears to be a software screenshot. The specimen is not acceptable for Class 9 because the specimens do not show the mark used on any remote control products.

Therefore, applicant must submit the following:

(1) A substitute specimen showing the mark in actual use in commerce for all classes of goods and/or services specified in International Class 9.

(2) The following statement, verified with an affidavit or signed declaration under 37 C.F.R. §2.20: “The substitute specimen was in use in commerce at least as early as the filing date of the application.” 37 C.F.R. §2.59(a); TMEP §904.05; see 37 C.F.R. §2.193(e)(1). If submitting a substitute specimen requires an amendment to the dates of use, applicant must also verify the amended dates. 37 C.F.R. §2.71(c); TMEP §904.05.

Examples of specimens for goods are tags, labels, instruction manuals, containers, photographs that show the mark on the actual goods or packaging, or displays associated with the actual goods at their point of sale. See TMEP §§904.03 et seq.

If applicant cannot satisfy the above requirements, applicant may amend the application from a use in commerce basis under Section 1(a) to an intent to use basis under Section 1(b), for which no specimen is required. See TMEP §806.03(c). However, if applicant amends the basis to Section 1(b), registration will not be granted until applicant later amends the application back to use in commerce by filing an acceptable allegation of use with a proper specimen. See 15 U.S.C. §1051(c), (d); 37 C.F.R. §§2.76, 2.88; TMEP §1103.

To amend to Section 1(b), applicant must submit the following statement, verified with an affidavit or signed declaration under 37 C.F.R. §2.20: “Applicant has had a bona fide intention to use the mark in commerce on or in connection with the goods and/or services listed in the application as of the filing date of the application.” 37 C.F.R. §2.34(a)(2); TMEP §806.01(b); see 15 U.S.C. §1051(b); 37 C.F.R. §§2.35(b)(1), 2.193(e)(1).

Pending receipt of a proper response, registration is refused because the specimen does not show the applied-for mark in use in commerce as a trademark and/or service mark for the identified goods and/or services. Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a).

/Tejbir Singh/

Trademark Attorney

Law Office 106

571-272-5878

571-273-9106 (fax)

Tejbir.Singh@uspto.gov (informal inquiries only)

TO RESPOND TO THIS LETTER: Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp. Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application. For technical assistance with online forms, e-mail TEAS@uspto.gov. For questions about the Office action itself, please contact the assigned trademark examining attorney. E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

All informal e-mail communications relevant to this application will be placed in the official application record.

WHO MUST SIGN THE RESPONSE: It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants). If an applicant is represented by an attorney, the attorney must sign the response.

PERIODICALLY CHECK THE STATUS OF THE APPLICATION: To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. Please keep a copy of the TSDR status screen. If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199. For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS: Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.