UNITED STATES PATENT AND TRADEMARK OFFICE
SERIAL NO: 76/550669
APPLICANT: Horizon International Inc.
|
|
CORRESPONDENT ADDRESS: DAVID B. KIRSCHSTEIN KIRSCHSTEIN, OTTINGER, ISRAEL 489 FIFTH AVENUE NEW YORK, NEW YORK 10017-6105
|
RETURN ADDRESS: Commissioner for Trademarks 2900 Crystal Drive Arlington, VA 22202-3514
|
MARK: I2I
|
|
CORRESPONDENT’S REFERENCE/DOCKET NO: N/A
CORRESPONDENT EMAIL ADDRESS:
|
Please provide in all correspondence:
1. Filing date, serial number, mark and applicant's name. 2. Date of this Office Action. 3. Examining Attorney's name and Law Office number. 4. Your telephone number and e-mail address.
|
Serial Number 76/550669
The assigned examining attorney has reviewed the referenced application and determined the following.
The examining attorney has searched the Office records and has found no similar registered or pending mark which would bar registration under Trademark Act Section 2(d), 15 U.S.C. §1052(d). TMEP §704.02.
If the applicant is asserting §44(e) as a basis for registration (based on the foreign registration that will issue from the application that the applicant relied on for priority), the applicant must submit a true copy, a photocopy, a certification, or a certified copy of a foreign registration from the applicant’s country of origin. The applicant’s country of origin must either be a party to a convention or treaty relating to trademarks to which the United States is also a party, or must extend reciprocal registration rights to nationals of the United States by law. See TMEP §§1002.01, 1003.03 and 1004.
If the foreign certificate of registration is not written in English, the applicant must provide an English translation. The translator should sign the translation. See TMEP §§1004.01 and 1004.01(b).
If applicant wishes to proceed relying on the applicant’s intent to use the mark in commerce under Trademark Act Section 1(b) as the sole basis for registration, with the claim of priority under Section 44(d), then applicant should so advise the trademark examining attorney. TMEP §§806.02(f) and 806.04(b). If applicant chooses to do so, this Office will approve the mark for publication without waiting for applicant to submit a copy of the foreign registration, once all other outstanding issues are resolved. Moreover, while the application may be approved for publication, the mark will not register until after an acceptable allegation of use has been filed.
If applicant does not indicate otherwise, this Office will presume that applicant wishes to rely on the foreign registration as an additional basis for registration and will require applicant to submit the copy of the foreign registration and, if appropriate, an English translation signed by the translator. TMEP §§1004.01 and 1004.01(b).
The drawing is unacceptable because there are small black dots surrounding the mark, which do not appear to be a part of the mark. The requirements for a special‑form drawing are as follows:
(1) The drawing must appear in black and white; no color is permitted.
(2) Every line and letter must be black and clear.
(3) The use of gray to indicate shading is unacceptable.
(4) The lining must not be too fine or too close together.
(5) The preferred size of the area in which the mark is displayed is 2½ inches (6.1 cm.) high and 2½ inches (6.1 cm.) wide. It should not be larger than 4 inches (10.3 cm.) high or 4 inches (10.3 cm.) wide.
(6) If the reduction of the mark to the required size renders any details illegible, the applicant may insert a statement in the application to describe the mark and these details.
37 C.F.R. §2.52; TMEP §§807.01(b) and 807.07(a). The Office will enforce these drawing requirements strictly.
The Office prefers that the drawing be depicted on a separate sheet of smooth, nonshiny, white paper 8 to 8½ inches (20.3 to 21.6 cm.) wide and 11 inches (27.9 cm.) long, and that the sheet contain a heading listing, on separate lines, the applicant’s complete name; the applicant’s address; the goods or services recited in the application; and, if the application is filed under Section 1(a) of the Act, the dates of first use of the mark and of first use of the mark in commerce; or, if the application is filed under Section 44(d), the priority filing date of the foreign application. 37 C.F.R. §2.52(b); TMEP §§807.01(a), 807.01(b), 807.01(c) and 807.07(a).
NOTE: The Trademark Rules pertaining to drawings were amended on November 2, 2003. For applications filed prior to November 2, 2003, applicants may follow either the new special form drawing rules or the special form drawing rules in force prior to their amendment on November 2, 2003. Exam Guide 01-03, section I.B.6.
The new requirements for a special-form drawing are as follows:
· The drawing must appear in black and white if color is not claimed as a feature of the mark, or in color if color is claimed as a feature of the mark.
· Drawings must be typed or made with a pen or by a process that will provide high definition when copied. A photolithographic, printer’s proof copy, or other high quality reproduction of the mark may be used. All lines must be clean, sharp and solid, and must not be fine or crowded.
· The image must be no larger than 3.15 inches (8 cm) high by 3.15 inches (8cm) wide.
· If reduction of the mark to the required size renders any details illegible, then applicant may insert a statement in the application to describe the mark and these details.
37 C.F.R. §§2.52(b); See TMEP §§807.01(b) and 807.07(a).
If submitted on paper, the Office prefers that the drawing be depicted on a separate sheet of non-shiny, white paper that is 8 to 8.5 inches wide and 11 to 11.69 inches long (20.3 to 21.6 cm. wide and 27.9 to 29.7 cm. long). One of the shorter sides of the sheet should be regarded as its top edge. In addition, the drawing should include the caption “DRAWING PAGE” at the top of the drawing beginning one-inch (2.5 cm) from the top edge. 37 C.F.R. §2.54.
The Office strictly enforces these drawing requirements.
To submit a special form drawing electronically, applicant must attach a digitized image of the mark to the submission. The Office will only accept an image in .jpg format. The image must be formatted at no less than 300 dots per inch and no more than 350 dots per inch; and with a length and width of no less than 250 pixels and no more than 944 pixels. All lines in the image must be clean, sharp and solid, and not fine or crowded, and produce a high quality image when copied. 37 C.F.R. §2.53.
If the applicant has any questions or needs assistance in responding to this Office action, please telephone the assigned examining attorney.
/Giancarlo Castro/
Examining Attorney
Law Office 110
703-308-9110(ext. 290)
How to respond to this Office Action:
To respond formally using the Office’s Trademark Electronic Application System (TEAS), visit http://www.gov.uspto.report/teas/index.html and follow the instructions.
To respond formally via regular mail, your response should be sent to the mailing Return Address listed above and include the serial number, law office and examining attorney’s name on the upper right corner of each page of your response.
FOR INQUIRIES OR QUESTIONS ABOUT THIS OFFICE ACTION, PLEASE CONTACT THE ASSIGNED EXAMINING ATTORNEY.