UNITED STATES PATENT AND TRADEMARK OFFICE

 

 

 

OFFICE ACTION

 

TO AVOID ABANDONMENT, WE MUST RECEIVE A PROPER RESPONSE TO THIS OFFICE ACTION WITHIN 6 MONTHS OF OUR MAILING OR E-MAILING DATE. 

 

 

Serial Number  76/537061

 

The assigned examining attorney has reviewed the referenced application and determined the following.

 

Search Results

 

The examining attorney has searched the Office records and has found no similar registered or pending mark which would bar registration under Trademark Act Section 2(d), 15 U.S.C. Section 1052(d).  TMEP section 1105.01.

 

However, several concerns remain to be addressed.

 

Drawing Unacceptable

 

Applicant must submit a new drawing showing the entire mark clearly and conforming to 37 C.F.R. §2.52.  The current drawing is not acceptable because it contains specks and stippling (presumably as a result of the photocopying of the mark) which render the mark dirty and indistinct. As such, it will not reproduce satisfactorily.  TMEP §807.07(a).

 

The requirements for a special-form drawing are as follows:

 

·        The drawing must appear in black and white if color is not claimed as a feature of the mark, or in color if color is claimed as a feature of the mark.

 

·        Drawings must be typed or made with a pen or by a process that will provide high definition when copied.  A photolithographic, printer’s proof copy, or other high quality reproduction of the mark may be used.  All lines must be clean, sharp and solid, and must not be fine or crowded.

 

·        The image must be no larger than 3.15 inches (8 cm) high by 3.15 inches (8cm) wide.

 

·        If reduction of the mark to the required size renders any details illegible, then applicant may insert a statement in the application to describe the mark and these details.

 

37 C.F.R. §§2.52(b); See TMEP §§807.01(b) and 807.07(a).

 

If submitted on paper, the Office prefers that the drawing be depicted on a separate sheet of non-shiny, white paper that is 8 to 8.5 inches wide and 11 to 11.69 inches long (20.3 to 21.6 cm. wide and 27.9 to 29.7 cm. long).  One of the shorter sides of the sheet should be regarded as its top edge. In addition, the drawing should include the caption “DRAWING PAGE” at the top of the drawing beginning one-inch (2.5 cm) from the top edge.  37 C.F.R. §2.54.

 

The Office strictly enforces these drawing requirements.

 

To submit a special form drawing electronically, applicant must attach a digitized image of the mark to the submission.  The Office will only accept an image in .jpg format.  The image must be formatted at no less than 300 dots per inch and no more than 350 dots per inch; and with a length and width of no less than 250 pixels and no more than 944 pixels.  All lines in the image must be clean, sharp and solid, and not fine or crowded, and produce a high quality image when copied.  37 C.F.R. §2.53.

 

Applicant May Elect Basis

 

The applicant has filed asserting a bona fide intention to use the mark in commerce under Trademark Act Section 1(b), 15 U.S.C. §1051(b), and claiming priority under Section 44(d), 15 U.S.C. §1126(d), based on a foreign application.  Under these circumstances, the applicant may rely solely on its intent to use the mark in commerce as the basis for registration and not the expected foreign registration, and still claim the benefit of the priority filing date.  If the applicant chooses to do so, this Office will approve the case for publication without waiting for the applicant to submit the foreign registration.  Of course, the application must be in condition for publication in all other respects.  Moreover, while the application may be approved for publication, the mark will not be registered until an acceptable allegation of use has been filed.

 

If the applicant wishes to proceed relying on the applicant’s intent to use the mark in commerce as the sole basis for registration, with the claim of priority, the applicant should so advise the examining attorney.  TMEP §§806.02(f) and 806.04(b).

 

If the applicant does not so indicate, this Office will presume that the applicant wishes to rely on the foreign registration as an additional basis for registration and will expect the applicant to submit a true copy, a photocopy, a certification, or a certified copy of the foreign registration and, if appropriate, an English translation.  It is customary for the translator to sign the translation.  TMEP §§1004.01 and 1004.01(b).

 

How to respond to this Office Action:

 

To respond formally using the Office’s Trademark Electronic Application System (TEAS), visit http://www.gov.uspto.report/teas/index.html and follow the instructions.

 

To respond formally via E-mail, visit http://www.gov.uspto.report/web/trademarks/tmelecresp.htm and follow the instructions.

 

To respond formally via regular mail, your response should be sent to the mailing Return Address listed above and include the serial number, law office and examining attorney’s name on the upper right corner of each page of your response.

 

To check the status of your application at any time, visit the Office’s Trademark Applications and Registrations Retrieval (TARR) system at http://tarr.gov.uspto.report/

 

For general and other useful information about trademarks, you are encouraged to visit the Office’s web site at http://www.gov.uspto.report/main/trademarks.htm

 

FOR INQUIRIES OR QUESTIONS ABOUT THIS OFFICE ACTION, PLEASE CONTACT THE ASSIGNED EXAMINING ATTORNEY.

 

 

John T. Lincoski /JTL/

Trademark Attorney

Law Office 113

(703)308-9113 ext. 286

John.Lincoski@USPTO.GOV