UNITED STATES PATENT AND TRADEMARK OFFICE
SERIAL NO: 76/468314
APPLICANT: BACARDI & COMPANY LIMITED
|
*76468314* |
CORRESPONDENT ADDRESS: NANCY A. ZOUBEK, ESQ. PENNIE & EDMONDS LLP 1155 AVENUE OF THE AMERICAS NEW YORK, NEW YORK 10036
|
RETURN ADDRESS: Commissioner for Trademarks 2900 Crystal Drive Arlington, VA 22202-3514
|
MARK: BACARDI VANILA
|
|
CORRESPONDENT’S REFERENCE/DOCKET NO: 6101-2174-99
CORRESPONDENT EMAIL ADDRESS:
|
Please provide in all correspondence:
1. Filing date, serial number, mark and applicant's name. 2. Date of this Office Action. 3. Examining Attorney's name and Law Office number. 4. Your telephone number and e-mail address.
|
Serial Number 76/468314
This letter responds to the applicant’s communication filed on April 26, 2004.
The disclaimer is acceptable and has been entered into the record.
Drawing Unacceptable
Upon further review, the drawing is not acceptable because it will not reproduce satisfactorily. The applicant must submit a new drawing showing the mark clearly and conforming to 37 C.F.R. §2.52. TMEP §807.07(a).
The requirements for a special‑form drawing are as follows:
(1) The drawing must appear in black and white; no color is permitted.
(2) Every line and letter must be black and clear.
(3) The use of gray to indicate shading is unacceptable.
(4) The lining must not be too fine or too close together.
(5) The preferred size of the area in which the mark is displayed is 2½ inches (6.1 cm.) high and 2½ inches (6.1 cm.) wide. It should not be larger than 4 inches (10.3 cm.) high or 4 inches (10.3 cm.) wide.
(6) If the reduction of the mark to the required size renders any details illegible, the applicant may insert a statement in the application to describe the mark and these details.
37 C.F.R. §2.52; TMEP §§807.01(b) and 807.07(a). The Office will enforce these drawing requirements strictly.
The Office prefers that the drawing be depicted on a separate sheet of smooth, nonshiny, white paper 8 to 8½ inches (20.3 to 21.6 cm.) wide and 11 inches (27.9 cm.) long, and that the sheet contain a heading listing, on separate lines, the applicant’s complete name; the applicant’s address; the goods or services recited in the application; and, if the application is filed under Section 1(a) of the Act, the dates of first use of the mark and of first use of the mark in commerce; or, if the application is filed under Section 44(d), the priority filing date of the foreign application. 37 C.F.R. §2.52(b); TMEP §§807.01(a), 807.01(b), 807.01(c) and 807.07(a).
To submit a special form drawing electronically, applicant must attach a digitized image of the mark to the submission. The Office will only accept an image in .jpg format. The image must be formatted at no less than 300 dots per inch and no more than 350 dots per inch; and with a length and width of no less than 250 pixels and no more than 944 pixels. All lines in the image must be clean, sharp and solid, and not fine or crowded, and produce a high quality image when copied. 37 C.F.R. §2.53.
/Esther Borsuk/
Examining Attorney
Law Office 112
Phone: (703) 306-7913
Fax: (703) 746-8112
How to respond to this Office Action:
To respond formally using the Office’s Trademark Electronic Application System (TEAS), visit http://www.gov.uspto.report/teas/index.html and follow the instructions.
To respond formally via regular mail, your response should be sent to the mailing Return Address listed above and include the serial number, law office and examining attorney’s name on the upper right corner of each page of your response.
FOR INQUIRIES OR QUESTIONS ABOUT THIS OFFICE ACTION, PLEASE CONTACT THE ASSIGNED EXAMINING ATTORNEY.