UNITED STATES PATENT AND TRADEMARK OFFICE
SERIAL NO: 76/446825
APPLICANT: Magnetic Power Systems, Inc.
|
|
CORRESPONDENT ADDRESS: MAGNETIC POWER SYSTEMS, INC. 1626 MANUFACTURERS DRIVE FENTON, MO 63026
|
RETURN ADDRESS: Commissioner for Trademarks 2900 Crystal Drive Arlington, VA 22202-3513 ecom116@uspto.gov
|
MARK: CYGNUS
|
|
CORRESPONDENT’S REFERENCE/DOCKET NO: N/A
CORRESPONDENT EMAIL ADDRESS: stuggle@maxcessintl.com |
Please provide in all correspondence:
1. Filing date, serial number, mark and applicant's name. 2. Date of this Office Action. 3. Examining Attorney's name and Law Office number. 4. Your telephone number and e-mail address.
|
Serial Number 76/446825
The assigned examining attorney has reviewed the referenced application and determined the following.
The examining attorney has searched the Office records and has found no similar registered or pending mark which would bar registration under Trademark Act Section 2(d), 15 U.S.C. §1052(d). TMEP §704.02.
Identification of Goods
The wording “apparatus and accessory” in the identification of goods is unacceptable as indefinite because the nature of the goods is unclear. The applicant must amend the identification to specify the common commercial name of the goods. If there is no common commercial name for the product, the applicant must describe the product and its intended uses. TMEP §1402.01.
In the identification, the applicant must use the common commercial names for the goods, be as complete and specific as possible and avoid the use of indefinite words and phrases. If the applicant chooses to use indefinite terms, such as “accessories,” “components,” “devices,” “equipment,” “materials,” “parts,” “systems” and “products,” then those words must be followed by the word “namely” and the goods listed by their common commercial names. TMEP §§1402.01 and 1402.03(a).
The applicant should consult the on-line identification manual on the PTO homepage for a searchable database of acceptable identifications for goods and services. The manual is available at: http://www.gov.uspto.report/web/offices/tac/doc/gsmanual.
Please note that, while an application may be amended to clarify or limit the identification, additions to the identification are not permitted. 37 C.F.R. §2.71(a); TMEP §1402.06. Therefore, the applicant may not amend to include any goods or services that are not within the scope of the goods and services recited in the present identification.
If the applicant prosecutes this application as a combined, or multiple‑class, application, the applicant must comply with each of the following.
(1) The applicant must list the goods/services by international class with the classes listed in ascending numerical order. TMEP §1403.01.
(2) The applicant must submit a filing fee for each international class of goods/services not covered by the fee already paid. 37 C.F.R. §§2.6(a)(1) and 2.86(a); TMEP §§810.01 and 1403.01. Effective January 1, 2003, the fee for filing a trademark application is $335 for each class. This applies to classes added to pending applications as well as to new applications filed on or after that date.
Drawing Unacceptable
The drawing is not acceptable because it will not reproduce satisfactorily. The applicant must submit a new drawing showing the mark clearly and conforming to 37 C.F.R. §2.52. TMEP §807.07(a).
The requirements for a special‑form drawing are as follows:
(1) The drawing must appear in black and white; no color is permitted.
(2) Every line and letter must be black and clear.
(3) The use of gray to indicate shading is unacceptable.
(4) The lining must not be too fine or too close together.
(5) The preferred size of the area in which the mark is displayed is 2½ inches (6.1 cm.) high and 2½ inches (6.1 cm.) wide. It should not be larger than 4 inches (10.3 cm.) high or 4 inches (10.3 cm.) wide.
(6) If the reduction of the mark to the required size renders any details illegible, the applicant may insert a statement in the application to describe the mark and these details.
37 C.F.R. §2.52; TMEP §§807.01(b) and 807.07(a). The Office will enforce these drawing requirements strictly.
The Office prefers that the drawing be depicted on a separate sheet of smooth, nonshiny, white paper 8 to 8½ inches (20.3 to 21.6 cm.) wide and 11 inches (27.9 cm.) long, and that the sheet contain a heading listing, on separate lines, the applicant’s complete name; the applicant’s address; the goods or services recited in the application; and, if the application is filed under Section 1(a) of the Act, the dates of first use of the mark and of first use of the mark in commerce; or, if the application is filed under Section 44(d), the priority filing date of the foreign application. 37 C.F.R. §2.52(b); TMEP §§807.01(a), 807.01(b), 807.01(c) and 807.07(a).
Response Guidelines
No set form is required for response to this Office action. The applicant must respond to each point raised. The applicant should simply set forth the required changes or statements and request that the Office enter them. The applicant must sign the response. In addition to the identifying information required at the beginning of this letter, the applicant should provide a telephone number to speed up further processing.
In all correspondence to the Patent and Trademark Office, the applicant should list the name and law office of the examining attorney, the serial number of this application, the mailing date of this Office action, and the applicant's telephone number.
Telephone Response Encouraged
PLEASE NOTE: All of the issues raised can be resolved by telephone. The applicant may telephone the examining attorney, instead of submitting a written response, to expedite the application.
/Esther Borsuk/
Examining Attorney
Law Office 116
Phone: (703) 306-7913
Fax: (703) 746-8116
ecom116@uspto.gov
How to respond to this Office Action:
To respond formally using the Office’s Trademark Electronic Application System (TEAS), visit http://www.gov.uspto.report/teas/index.html and follow the instructions.
To respond formally via E-mail, visit http://www.gov.uspto.report/web/trademarks/tmelecresp.htm and follow the instructions.
To respond formally via regular mail, your response should be sent to the mailing Return Address listed above and include the serial number, law office and examining attorney’s name on the upper right corner of each page of your response.
FOR INQUIRIES OR QUESTIONS ABOUT THIS OFFICE ACTION, PLEASE CONTACT THE ASSIGNED EXAMINING ATTORNEY.
Fee increase effective January 1, 2003 - Informational
Effective January 1, 2003, the fee for filing an application for trademark registration will be increased to $335.00 per International Class. The USPTO will not accord a filing date to applications that are filed on or after that date that are not accompanied by a minimum of $335.00.
Additionally, the fee for amending an existing application to add an additional class or classes of goods/services will be $335.00 per class for classes added on or after January 1, 2003.