Mark For: KUB DUPLON® trademark registration is intended to cover the categories of power operated drills for use in machine tools, namely coated and uncoated drills made of high-speed steel, carbide, ceramic cutting materials, cubic boron nitride, polycrystalline diamond; drills with interchangeable cutting tips; drills with brazed or adhesively bonded cutting tips or cutting tips firmly connected in another way; drills with interchangeable drilling bits; drills with interchangeable pilot, center or guide drills; modular drills; drills with a modular connection on the machine side as an interface and as a separating point; extensions for drilling machine tools, namely, extension adapters, intermediate adapters, and parts of the aforesaid goods; interchangeable and firmly connected, coated and uncoated, drill cutting tips made of high-speed steel, carbide, ceramic cutting materials, cubic boron nitride, polycrystalline diamond; pilot, center and guide drills for drilling machine tools; supporting, guiding, setting and clamping elements for drilling machine tools, namely, clamps, bolts, holders and screws; all of the aforesaid goods as machine parts. [all]
Status
2022-08-01 UTC
DEAD REGISTRATION Cancelled Invalidated
The trademark application was registered, but subsequently it was cancelled or invalidated and removed from the registry.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
No
Current Use
No
Intent To Use
No
Filed ITU
Yes
44D Filed
Yes
44E Current
Yes
66A Current
No
Current Basis
No
No Basis
No
Cancellation Code
2
Domestic Representative
Charles P. LaPolla, Esq.
Attorney Name
Charles P. LaPolla, Esq.
Attorney Docket Number
T/2107-200
Law Office Assigned
L40
Employee Name
GAYNOR, BARBARA ANNE
Timeline
2002-02-13
Application Filed
2002-12-10
Published
2002-12-10
Published for Opposition
2003-03-04
Trademark Registered
2009-03-13
Location: POST REGISTRATION
2013-10-11
Cancelled
2013-10-11
Status: Dead/Cancelled
2013-10-11
Status: Registration cancelled because registrant did not file an acceptable declaration under Section 8. To view all documents in this
CHARLES P. LAPOLLA, ESQ. OSTROLENK, FABER, GERB & SOFFEN, LLP 1180 AVENUE OF THE AMERICAS NEW YORK, NEW YORK 10036-8403
Good, Services, and Codes
(CANCELLED) IC 007. US 013 019 021 023 031 034 035. G & S: Power operated drills for use in machine tools, namely coated and uncoated drills made of high-speed steel, carbide, ceramic cutting materials, cubic boron nitride, polycrystalline diamond; drills with interchangeable cutting tips; drills with brazed or adhesively bonded cutting tips or cutting tips firmly connected in another way; drills with interchangeable drilling bits; drills with interchangeable pilot, center or guide drills; modular drills; drills with a modular connection on the machine side as an interface and as a separating point; extensions for drilling machine tools, namely, extension adapters, intermediate adapters, and parts of the aforesaid goods; interchangeable and firmly connected, coated and uncoated, drill cutting tips made of high-speed steel, carbide, ceramic cutting materials, cubic boron nitride, polycrystalline diamond; pilot, center and guide drills for drilling machine tools; supporting, guiding, setting and clamping elements for drilling machine tools, namely, clamps, bolts, holders and screws; all of the aforesaid goods as machine parts
International Codes:
7
U.S. Codes:
013,019,021,023,031,034,035
Type Code
Type
GS0071
Power operated drills for use in machine tools, namely coated and uncoated drills made of high-speed steel, carbide, ceramic cutting materials, cubic boron nitride, polycrystalline diamond; drills with interchangeable cutting tips; drills with brazed or adhesively bonded cutting tips or cutting tips firmly connected in another way; drills with interchangeable drilling bits; drills with interchangeable pilot, center or guide drills; modular drills; drills with a modular connection on the machine side as an interface and as a separating point; extensions for drilling machine tools, namely, extension adapters, intermediate adapters, and parts of the aforesaid goods; interchangeable and firmly connected, coated and uncoated, drill cutting tips made of high-speed steel, carbide, ceramic cutting materials, cubic boron nitride, polycrystalline diamond; pilot, center and guide drills for drilling machine tools; supporting, guiding, setting and clamping elements for drilling machine tools, namely, clamps, bolts, holders and screws; all of the aforesaid goods as machine parts
Trademark Filing History
Description
Date
Proceeding Number
CANCELLED SEC. 8 (10-YR)/EXPIRED SECTION 9
2013-10-11
AUTOMATIC UPDATE OF ASSIGNMENT OF OWNERSHIP
2010-06-02
REGISTERED - SEC. 8 (6-YR) ACCEPTED & SEC. 15 ACK.
2009-03-13
59807
ASSIGNED TO PARALEGAL
2009-03-06
59807
REGISTERED - SEC. 8 (6-YR) & SEC. 15 FILED
2009-02-25
PAPER RECEIVED
2009-02-25
CASE FILE IN TICRS
2008-07-23
AUTOMATIC UPDATE OF ASSIGNMENT OF OWNERSHIP
2008-06-18
REGISTERED-PRINCIPAL REGISTER
2003-03-04
PUBLISHED FOR OPPOSITION
2002-12-10
NOTICE OF PUBLICATION
2002-11-20
APPROVED FOR PUB - PRINCIPAL REGISTER
2002-09-17
Sec. 1(B) CLAIM DELETED
2002-07-29
77975
PAPER RECEIVED
2002-07-29
CORRESPONDENCE RECEIVED IN LAW OFFICE
2002-07-29
NON-FINAL ACTION MAILED
2002-05-28
ASSIGNED TO EXAMINER
2002-05-16
76738
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.