Section 7 Request

PTO Form 1597 (Rev 11/2007)

OMB No. 0651-0055 (Exp. 07/31/2018)

---

PTO Form 1597 (Rev 11/2007)

OMB No. 0651-0055 (Exp. 07/31/2018)

Section 7 Request Form

To the Commissioner for Trademarks:

The registrant requests the following amendment(s) to registration no. 2718709 ELRINGKLINGER (Stylized and/or with Design, see http://tess2.gov.uspto.report/ImageAgent/ImageAgentProxy?getImage=76349348) has been amended as follows:

EXPLANATION OF FILING

When reviewing the current listing of goods/services on the TDSR database in preparation for the renewal of the mark, we noted the following minor errors made by the Trademark Office.  Specifically:

Class 6:  the semicolon after "cylinder head bolts" was mistakenly deleted.  As "metal seals" are not part of "metal fasteners" but are separate goods, the comma after "sleeves" should be replaced with a semicolon.

Class 7:  the semicolon after "profile rings" was mistakenly deleted.  The comma after "oil seals" should be replaced with a semicolon to distinguish the separate goods in the identification of class 7.

Class 12:  the semicolon after "profile rings" was mistakenly deleted.  The comma after "cylinder head cover seals" should be replaced with a semicolon to distinguish the separate goods remaining in the "Gaskets and seals..." section of the class 12 identification.

Class 17:  the semicolon after "pistons and housings" was mistakenly deleted.  The comma after "linings for guides" should be replaced with a semicolon

 

 

CLASSIFICATION AND LISTING OF GOODS/SERVICES
Registrant proposes to amend the following class of goods/services in the application:
Current: Class 006 for Metal fasteners, namely, screws, sleeves, [ bolts and cylinder head bolts; ] and metal seals
Original Filing Basis:
Registrant has made of record the following information concerning a foreign application: Registrant has a bona fide intention to use the mark in commerce on or in connection with the identified goods and/or services, and asserts a claim of priority based on [Germany application number 30136537.7 filed 06/15/2001].

Filing Basis: Section 44(e), Based on Foreign Registration: Registrant has a bona fide intention to use the mark in commerce on or in connection with the identified goods and /or services, and submits a copy of [ Germany registration number 30136537 registered 09/04/2001 with a renewal date of __________ and an expiration date of 06/30/2011 ], and translation thereof, if appropriate. 15 U.S.C. Section 1126(e), as amended.

Proposed: Class 006 for Metal fasteners, namely, screws, sleeves;[ bolts and cylinder head bolts; ] and metal seals
Registrant has made of record the following information concerning a foreign application: Registrant has a bona fide intention to use the mark in commerce on or in connection with the identified goods and/or services, and asserts a claim of priority based on [Germany application number 30136537.7 filed 06/15/2001].

Filing Basis: Section 44(e), Based on Foreign Registration: Registrant has a bona fide intention to use the mark in commerce on or in connection with the identified goods and /or services, and will submit a copy of [ Germany registration number 30136537 registered 09/04/2001 with a renewal date of __________ and an expiration date of 06/30/2011 ], and translation thereof, if appropriate, before the application may proceed to registration. 15 U.S.C. Section 1126(e), as amended.

Registrant proposes to amend the following class of goods/services in the application:
Current: Class 007 for [ Machine parts, namely, mechanical seals; ] gaskets and seals for machine motors and gears, namely, [ cylinder head gaskets, ] rotary shaft seals, [ valve cover gaskets, valve stem sealings, ] oil seals, [ oil pan seals, intake manifold seals, water pump seals, cylinder head cover seals, carburetor air filter sealings, cylinder head cap seals, camshaft carrier seals, ramming chamber sealings, push rod space seals, O-ring seals and profile rings; attachments for machines and apparatuses, for motors and gears other than motors and gears for vehicles, made of metal and of plastic, namely, valve covers, exhaust manifolds, oil pans and heat shields; subassemblies comprising a plurality of components for attaching to machines, motors and gears other than motors and gears for vehicles, comprising an attachment, namely, a valve cover, an oil separator cover or a filler cap, made of metal or of plastic, an elastomer gasket and fastening elements, namely, screws, sleeves and/or bolts; ] and plastic components for the construction of machines and apparatuses, for construction of motors and gears other than motors and gears for vehicles, namely, [ push rod protective tubes, dampening elements for guide bushings, rubber-sheathed bearing bushings, dust and protection caps, pistons and piston guides, ] nozzles, [ fixing and transport rollers for machines or apparatuses, ] bellows, [ membranes, ] electric insulators, heat insulators, [ heating elements, ] lip seals, [ friction bearings, ] collars, bearing rings and tubes
Original Filing Basis:
Filing Basis: Section 44(e), Based on Foreign Registration: Registrant has a bona fide intention to use the mark in commerce on or in connection with the identified goods and /or services, and submits a copy of [__________ registration number __________ registered __________ with a renewal date of __________ and an expiration date of __________ ], and translation thereof, if appropriate. 15 U.S.C. Section 1126(e), as amended.

Proposed: Class 007 for [ Machine parts, namely, mechanical seals; ] gaskets and seals for machine motors and gears, namely, [ cylinder head gaskets, ] rotary shaft seals, [ valve cover gaskets, valve stem sealings, ] oil seals;[ oil pan seals, intake manifold seals, water pump seals, cylinder head cover seals, carburetor air filter sealings, cylinder head cap seals, camshaft carrier seals, ramming chamber sealings, push rod space seals, O-ring seals and profile rings; attachments for machines and apparatuses, for motors and gears other than motors and gears for vehicles, made of metal and of plastic, namely, valve covers, exhaust manifolds, oil pans and heat shields; subassemblies comprising a plurality of components for attaching to machines, motors and gears other than motors and gears for vehicles, comprising an attachment, namely, a valve cover, an oil separator cover or a filler cap, made of metal or of plastic, an elastomer gasket and fastening elements, namely, screws, sleeves and/or bolts; ] and plastic components for the construction of machines and apparatuses, for construction of motors and gears other than motors and gears for vehicles, namely, [ push rod protective tubes, dampening elements for guide bushings, rubber-sheathed bearing bushings, dust and protection caps, pistons and piston guides, ] nozzles, [ fixing and transport rollers for machines or apparatuses, ] bellows, [ membranes, ] electric insulators, heat insulators, [ heating elements, ] lip seals, [ friction bearings, ] collars, bearing rings and tubes
Filing Basis: Section 44(e), Based on Foreign Registration: Registrant has a bona fide intention to use the mark in commerce on or in connection with the identified goods and /or services, and will submit a copy of [__________ registration number __________ registered __________ with a renewal date of __________ and an expiration date of __________ ], and translation thereof, if appropriate, before the application may proceed to registration. 15 U.S.C. Section 1126(e), as amended.

Registrant proposes to amend the following class of goods/services in the application:
Current: Class 012 for Gaskets and seals for the construction of motors and gears for vehicles, namely, cylinder head gaskets, [ rotary shaft seals, ] valve cover gaskets, [ valve stem sealings, ] oil seals, oil pan seals, [ intake manifold seals, ] water pump seals, chain case seals, crankcase seals, cylinder head cover seals, [ carburetor air filter sealings, cylinder head cap seals, camshaft carrier seals, ramming chamber sealings, push rod space seals, O-ring seals and profile rings; ] attachments for motors and gears for vehicles, namely, valve covers, [ exhaust manifolds, ] oil pans and heat shields; [ subassemblies comprising a plurality of components for attaching to motors and gears, comprising an attachment, namely, a valve cover, an oil separator cover or a filler cap, an elastomer gasket and fastening elements, namely, screws, sleeves and/or bolts; ] heat protection components and sound protection components for motor vehicles, namely, thermal shields; and plastic components for the construction of motors and gears for vehicles, namely, [ push rod protective tubes, dampening elements for guide bushings, rubber-sheathed bearing bushings, dust and protection caps, pistons and piston guides, nozzles, ] bellows, [ membranes, ] electric insulators, heat insulators, [ heating elements, lip seals, friction bearings, collars, bearing rings ] and tubes
Original Filing Basis:
Filing Basis: Section 44(e), Based on Foreign Registration: Registrant has a bona fide intention to use the mark in commerce on or in connection with the identified goods and /or services, and submits a copy of [__________ registration number __________ registered __________ with a renewal date of __________ and an expiration date of __________ ], and translation thereof, if appropriate. 15 U.S.C. Section 1126(e), as amended.

Proposed: Class 012 for Gaskets and seals for the construction of motors and gears for vehicles, namely, cylinder head gaskets, [ rotary shaft seals, ] valve cover gaskets, [ valve stem sealings, ] oil seals, oil pan seals, [ intake manifold seals, ] water pump seals, chain case seals, crankcase seals, cylinder head cover seals; [ carburetor air filter sealings, cylinder head cap seals, camshaft carrier seals, ramming chamber sealings, push rod space seals, O-ring seals and profile rings; ] attachments for motors and gears for vehicles, namely, valve covers, [ exhaust manifolds, ] oil pans and heat shields; [ subassemblies comprising a plurality of components for attaching to motors and gears, comprising an attachment, namely, a valve cover, an oil separator cover or a filler cap, an elastomer gasket and fastening elements, namely, screws, sleeves and/or bolts; ] heat protection components and sound protection components for motor vehicles, namely, thermal shields; and plastic components for the construction of motors and gears for vehicles, namely, [ push rod protective tubes, dampening elements for guide bushings, rubber-sheathed bearing bushings, dust and protection caps, pistons and piston guides, nozzles, ] bellows, [ membranes, ] electric insulators, heat insulators, [ heating elements, lip seals, friction bearings, collars, bearing rings ] and tubes
Filing Basis: Section 44(e), Based on Foreign Registration: Registrant has a bona fide intention to use the mark in commerce on or in connection with the identified goods and /or services, and will submit a copy of [__________ registration number __________ registered __________ with a renewal date of __________ and an expiration date of __________ ], and translation thereof, if appropriate, before the application may proceed to registration. 15 U.S.C. Section 1126(e), as amended.

Registrant proposes to amend the following class of goods/services in the application:
Current: Class 017 for [ Adhesive sealant compounds; sealing materials namely, general purpose silicone rubber sealant, general purpose nitrile-butadiene rubber sealant, general purpose fluororubber sealant; ] plastic sheeting for [ coatings or ] linings for guides,[ pistons and housings; ] and non-metallic nonstick foils
Original Filing Basis:
Filing Basis: Section 44(e), Based on Foreign Registration: Registrant has a bona fide intention to use the mark in commerce on or in connection with the identified goods and /or services, and submits a copy of [__________ registration number __________ registered __________ with a renewal date of __________ and an expiration date of __________ ], and translation thereof, if appropriate. 15 U.S.C. Section 1126(e), as amended.

Proposed: Class 017 for [ Adhesive sealant compounds; sealing materials namely, general purpose silicone rubber sealant, general purpose nitrile-butadiene rubber sealant, general purpose fluororubber sealant; ] plastic sheeting for [ coatings or ] linings for guides;[ pistons and housings; ] and non-metallic nonstick foils
Filing Basis: Section 44(e), Based on Foreign Registration: Registrant has a bona fide intention to use the mark in commerce on or in connection with the identified goods and /or services, and will submit a copy of [__________ registration number __________ registered __________ with a renewal date of __________ and an expiration date of __________ ], and translation thereof, if appropriate, before the application may proceed to registration. 15 U.S.C. Section 1126(e), as amended.

OWNER AND/OR ENTITY INFORMATION
Registrant proposes to amend the following:
Current: ElringKlinger AG, a corporation of GERMANY (DEX), having an address of
      Max-Eyth-Strasse 2
      Dettingen 72581,
      Germany
Proposed: ElringKlinger AG, a corporation of Germany, having an address of

      Max-Eyth-Strasse 2
      Dettingen, 72581
      Germany


ATTORNEY INFORMATION
Registrant proposes to amend the following:
Current: DOUGLAS M. MCALLISTER LIPSITZ & MCALLISTER, LLC BUILDING 8 755 MAIN STREET MONROE Connecticut (CT) United States (USX) 06468
Proposed: Douglas M. McAllister of Lipsitz & McAllister, LLC, having an address of 755 Main Street Building 8 MONROE, Connecticut United States 06468, whose e-mail address is info@patlawfirm.com, whose phone number is 203-459-0200 and whose fax number is 203-459-0201.
The attorney docket/reference number is HOEG-1465.



CORRESPONDENCE ADDRESS CHANGE
Registrant proposes to amend the following:
Current: DOUGLAS M. MCALLISTER LIPSITZ & MCALLISTER, LLC BUILDING 8 755 MAIN STREET MONROE Connecticut (CT) United States (USX) 06468
Proposed: Douglas M. McAllister of Lipsitz & McAllister, LLC, having an address of 755 Main Street Building 8 MONROE, Connecticut United States 06468, whose e-mail address is info@patlawfirm.com, whose phone number is 203-459-0200 and whose fax number is 203-459-0201.
The docket/reference number is HOEG-1465.



I hereby elect not to submit any fee. I believe no fee is required because I am seeking to correct an immaterial, e.g., clerical, error that was the fault of the USPTO, rather than the fault of the owner. I understand that the Office may, upon later review, require a fee payment.
SIGNATURE(S)
Declaration Signature
I hereby elect to bypass the submission of a signed declaration, because I believe a declaration is not required by the rules of practice. I understand that the post registration examiner could still, upon later review, require a signed declaration.
Request Signature
Signature: /douglas m. mcallister/     Date: 05/17/2013
Signatory's Name: Douglas M. McAllister
Signatory's Position: Attorney of record, CT bar member

Signatory's Phone: 203-459-0200

The signatory has confirmed that he/she is an attorney who is a member in good standing of the bar of the highest court of a U.S. state, which includes the District of Columbia, Puerto Rico, and other federal territories and possessions; and he/she is currently the registrant's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S. attorney or a Canadian attorney/agent not currently associated with his/her company/firm previously represented the registrant in this matter: (1) the registrant has filed or is concurrently filing a signed revocation of or substitute power of attorney with the USPTO; (2) the USPTO has granted the request of the prior representative to withdraw; (3) the registrant has filed a power of attorney appointing him/her in this matter; or (4) the registrant's appointed U.S. attorney or Canadian attorney/agent has filed a power of attorney appointing him/her as an associate attorney in this matter.

The registrant is NOT filing a Declaration of Use of Mark under Section 8; a Combined Declaration of Use of Mark under Sections 8 & 15; or a Combined Declaration of Use of Mark/Application for Renewal of Registration of Mark under Sections 8 & 9 in conjunction with this Section 7 Request.

Mailing Address:    Douglas M. McAllister
   Lipsitz & McAllister, LLC
   Building 8
   755 Main Street
   MONROE, Connecticut 06468
        
Serial Number: 76349348
Internet Transmission Date: Fri May 17 09:16:31 EDT 2013
TEAS Stamp: USPTO/S7R-XX.XXX.X.XX-201305170916319167
50-2718709-500da6f246f607636198b957e62c2
f1652bfae589b169e3c4e91aacff1f6be8b3-N/A
-N/A-20130517091058737346