Notice of Allowance

HAND-LAMP

Sugatsune Kogyo Co., Ltd.

Notice of Allowance


U.S. Patent and Trademark Office (PTO) NOTICE OF ALLOWANCE

(NOTE: If any data on this notice is incorrect, please submit a written request for correction of the NOA to: Assistant Commissioner for Trademarks, Box ITU, 2900 Crystal Drive, Arlington, VA 22202-3513. Please include the serial number of your application on ALL correspondence with the PTO. 15 U.S.C. 1063(b)(2))

ISSUE DATE OF NOA: May 6, 2003


	MARSHA G. GENTNER JACOBSON PRICE HOLMAN & STERN PLLC 400 7TH ST NW STE 600 WASHINGTON DC 20004-2218	ATTORNEY REFERENCE NUMBER T32491US0

** IMPORTANT INFORMATION: 6 MONTH DEADLINE **

To avoid ABANDONMENT of this application, either a "Statement of Use" (a.k.a. "Allegation of Use") or a "Request for Extension of Time to File a Statement of Use" (a.k.a. "Extension Request") and the appropriate fee(s) must be received in the PTO within six months of the issue date of this Notice of Allowance (NOA) for those goods and/or services based on intent to use. Failure to do so will result in the ABANDONMENT of this application.

Please note that both the "Statement of Use " and "Extension Request" have many legal requirements, including fees. These requirements are explained in the PTO booklet "Basic Facts About Trademarks", which can be obtained upon request at (703)308-9000. In addition, there are printed forms contained in this booklet (for "Statement of Use" and "Extension Requests") for your use.

The following information should be reviewed for accuracy:


SERIAL NUMBER:	76/288689
MARK:	HAND-LAMP (AND DESIGN)
OWNER:	Sugatsune Kogyo Co., Ltd.
	8-11, Higashikanda 1-chome Chiyoda-ku, Tokyo , JAPAN

This application has the following bases, but not necessarily for all listed goods/services:

Section 1(a): NO

Section 1(b): YES

Section 44(e): NO

GOODS/SERVICES BY INTERNATIONAL CLASS

006 -	METAL HANDLES FOR DOORS, CABINETS AND DRAWERS; METAL KNOBS; METAL HINGES; METAL LATCHES; METAL DOOR, WINDOW, CABINET AND DRAWER HARDWARE, NAMELY PULLS, MOUNTING PLATES, CATCHES; METAL LOCKS AND KEYS THEREFOR; METAL HOOKS AND BUMPER HOOKS; METAL CLOTHES HOOKS; METAL TRESTLES FOR USE AS TABLE SUPPORTS; METAL DOOR FITTINGS, NAMELY CHAINS; METAL DOOR BOLTS; DOOR HARDWARE, NAMELY KEYS AND KEY CYLINDERS; METAL DOOR STOPS; METAL DOOR PLATES; METAL RUNNERS FOR SLIDING DOORS; METAL DOOR HARDWARE, NAMELY, TRACKS, HANGERS, ROLLERS, HINGES, MOUNTING PLATES, GUIDE BARS, STOPPERS, ADAPTERS, DOOR HOLDERS AND CLOSERS, GLIDES, SLIDE RAILS, HASPS, BAR LATCHES, FOLDING DOOR SETS; METAL CASTERS AND MOUNTING NUTS THEREFOR; METAL DRAWER HARDWARE, NAMELY, SLIDES, EXTENSIONS AND STOPS; METAL VENTILATORS IN THE NATURE OF AIR DUCT COVERS; METAL BED HARDWARE, NAMELY NUTS, BOLTS, SCREWS, ANGLES, BRACKETS, HINGES, AND MOUNTING PLATES; METAL BUILDERS' HARDWARE, NAMELY FASTENERS IN THE FORM OF NUTS, SCREWS AND BOLTS FOR WOOD AND METAL, SHELF STANDARDS AND SUPPORTS, ANGLES, BRACKETS, SAFETY CABINET HOLDERS, METAL DECORATING MIRROR SUPPORTS, METAL PANEL HOLDERS, DAMPERS, CLOSET HANGER EXTENSIONS AND PULL DOWN RODS, AND BRACKETS AND SIDE GUARDS THEREFOR; METAL HARDWARE, NAMELY SPRINGS, STAYS, SWING, LIFTS, AND HANGER PLATES
016 -	PEN AND PENCIL TRAYS
020 -	NON-METAL HINGES; NON-METAL LATCHES; NON-METAL DOOR, WINDOW, CABINET AND DRAWER HARDWARE, NAMELY PULLS, MOUNTING PLATES, CATCHES; NON METAL TIE RACKS; NON-METAL HOOKS; NON-METAL CLOTHES HOOKS; NON-METAL DOOR BOLTS; NON-METAL DOOR HOLDERS; NON-METAL DOOR PLATES; FURNITURE PARTS, NAMELY, OVER THE TOP FLIPPER DOOR FOR DRAWERS AND CABINETS, TABLE LEGS AND GLIDES THEREFOR, NON-METAL RAILS, SCREWS AND HARDWARE, NAMELY, NUTS, BOLTS, CASTERS, ANGLES, BRACKETS, DOWELS AND MOUNTING PLATES; NON-METAL STAYS, AND SWIVELS FOR DISPLAY STANDS, TELEVISION SETS AND FURNITURE; PLASTIC CABLE AND WIRE GRUMMETS FOR DESKS; NON-METAL RUNNERS FOR SLIDING DOORS; NON-METAL CASTERS AND MOUNTING NUTS THEREFOR; PLASTIC AND WOOD HANDLES FOR DOORS, CABINETS AND DRAWERS; WOOD KNOBS; PLASTIC AND WOOD DOOR STOPS AND HOLDERS; PLASTIC CASTERS AND MOUNTING NUTS THEREFOR; PLASTIC VENTILATORS IN THE NATURE OF AIR DUCT COVERS; BUILDERS' HARDWARE, NAMELY PLASTIC FASTENERS IN THE FORM OF SCREWS, BOLTS, PUSH SOCKET BOLTS, NYLON SCREW AND SOCKET, AND CORNER JOINTS FOR WOOD AND METAL SHELF STANDARDS AND SUPPORTS, ANGLES AND BRACKETS; PLASTIC DAMPERS, SPACERS, CLOSET HANGER EXTENSIONS AND PULL DOWN RODS AND PLASTIC STOP RINGS THEREFOR
021 -	PORCELAIN HANDLES FOR DOORS, CABINETS AND DRAWERS; PORCELAIN KNOBS; PORCELAIN DOOR STOPS; TOWEL RACKS AND BARS

ALL OF THE GOODS/SERVICES IN EACH CLASS ARE LISTED

ADDITIONAL INFORMATION MAY BE PRESENT IN THE PTO RECORDS

uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.