Mark For: PERFORMASTAR PLUS™ trademark registration is intended to cover the categories of
Research | OneLook Acronym Finder |
Serial Number | 76216381 |
Mark Literal Elements | PERFORMASTAR PLUS |
Mark Drawing Type | 1 - TYPESET WORD(S) /LETTER(S) /NUMBER(S) |
Mark Type | TRADEMARK. SERVICE MARK |
Standard Character Claim | No |
Register | PRINCIPAL |
Current Location | FILE REPOSITORY (FRANCONIA) 2003-05-29 |
Basis | 1(b) |
Class Status | ACTIVE |
Primary US Classes |
|
Primary International Class |
|
Filed Use | No |
Current Use | No |
Intent To Use | Yes |
Filed ITU | Yes |
44D Filed | No |
44E Current | No |
66A Current | No |
Current Basis | No |
No Basis | No |
Attorney Name | Julie A Greenberg |
Attorney Docket Number | CWJ-11119/03 |
Law Office Assigned | L50 |
Employee Name | BEYER JR, BROOKE A |
2001-02-26 | Application Filed |
2002-05-28 | Published |
2002-05-28 | Published for Opposition |
2003-02-21 | Abandon |
2003-02-21 | Status: Abandoned because no Statement of Use or Extension Request timely filed after Notice of Allowance was issued. To view all docume |
2003-02-21 | Status: Dead/Abandoned |
2003-05-29 | Location: FILE REPOSITORY (FRANCONIA) |
2018-07-08 | Transaction Date |
Party: | Star Cutter Company |
Address | 23461 Industrial Park Drive Farmington Hills, MICHIGAN UNITED STATES 48335 |
Legal Entity Type | Corporation |
Legal Entity State | MICHIGAN |
Application | 2001-02-26 | |
Drawing | 2001-02-26 | |
Notice of Abandonment | 2003-05-23 |
(ABANDONED)
IC 002. US 006 011 016. G & S: finishing type coatings for use on industrial tooling, namely, cutting tools, medical tools, forming tools and dies(ABANDONED)
IC 007. US 013 019 021 023 031 034 035. G & S: parts for power-operated industrial tools, namely, saws, drills and cutters, which parts are mounted on spindles of industrial, power machinery(ABANDONED)
IC 010. US 026 039 044. G & S: medical tools, namely, saws, drills and broaches(ABANDONED)
IC 040. US 100 103 106. G & S: Treating of metals, namely, providing titanium-based coatings for industrial tooling, cutting tools, medical tools, forming tools, dies, saws, drills, and cutters
International Codes: | 2 |
U.S. Codes: | 006,011,016 |
International Codes: | 7 |
U.S. Codes: | 013,019,021,023,031,034,035 |
International Codes: | 10 |
U.S. Codes: | 026,039,044 |
International Codes: | 40 |
U.S. Codes: | 100,103,106 |
Type Code | Type |
---|---|
GS0021 | finishing type coatings for use on industrial tooling, namely, cutting tools, medical tools, forming tools and dies |
Description | Date | Proceeding Number |
---|---|---|
ABANDONMENT - NO USE STATEMENT FILED | 2003-05-22 | |
NOA MAILED - SOU REQUIRED FROM APPLICANT | 2002-08-20 | |
PUBLISHED FOR OPPOSITION | 2002-05-28 | |
NOTICE OF PUBLICATION | 2002-05-08 | |
APPROVED FOR PUB - PRINCIPAL REGISTER | 2002-03-14 | |
CORRESPONDENCE RECEIVED IN LAW OFFICE | 2002-01-04 | |
NON-FINAL ACTION MAILED | 2001-07-03 | |
ASSIGNED TO EXAMINER | 2001-06-26 | 78063 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.