Mark For: CETIM-SERTI® trademark registration is intended to cover the categories of
Research | OneLook Acronym Finder |
Serial Number | 76193952 |
Registration Number | 2687942 |
Mark Literal Elements | CETIM-SERTI |
Mark Drawing Type | 1 - TYPESET WORD(S) /LETTER(S) /NUMBER(S) |
Mark Type | TRADEMARK. SERVICE MARK |
Standard Character Claim | No |
Register | PRINCIPAL |
Current Location | SCANNING ON DEMAND 2008-03-06 |
Basis | 44(e) |
Class Status | SECTION 8 - CANCEL |
Primary US Classes |
|
Primary International Class |
|
Filed Use | No |
Current Use | No |
Intent To Use | No |
Filed ITU | Yes |
44D Filed | Yes |
44E Current | Yes |
66A Current | No |
Current Basis | No |
No Basis | No |
Cancellation Code | 2 |
Domestic Representative | Gene S Winter |
Attorney Name | Gene S Winter |
Attorney Docket Number | 02659-T0016A |
Law Office Assigned | M50 |
Employee Name | CRAVEN, P S |
2001-01-12 | Application Filed |
2002-02-12 | Published |
2002-02-12 | Published for Opposition |
2003-02-18 | Trademark Registered |
2008-03-06 | Location: SCANNING ON DEMAND |
2009-09-26 | Cancelled |
2009-09-26 | Status: Dead/Cancelled |
2009-09-26 | Status: Registration cancelled because registrant did not file an acceptable declaration under Section 8. To view all documents in this |
2018-07-08 | Transaction Date |
Party: | Centre Technique des Industries Mecaniques |
Address | 52, avenue Felix Louat 60300 Senlis FRANCE |
Legal Entity Type | Corporation |
Legal Entity State | FRANCE |
Application | IMAGE/TIFF | 2001-01-12 |
Drawing | IMAGE/TIFF | 2001-01-12 |
Paper Correspondence Incoming | 2002-06-13 | |
Paper Correspondence Incoming | 2002-06-13 | |
Registration Certificate | 2003-02-18 | |
Registration Certificate | IMAGE/TIFF | 2003-02-18 |
File Jacket | 2008-02-29 | |
Unclassified | 2008-02-29 |
(CANCELLED)
IC 007. US 013 019 021 023 031 034 035. G & S: MACHINE TOOLS, NAMELY, FEEDERS; INDUSTRIAL ROBOTIZED MACHINE TOOLS, NAMELY, CRIMPING CAMS FOR METAL PART CRIMPING MACHINES, CRIMPING CAMS FOR METAL BOX CRIMPING MACHINES; METAL CRIMPING MACHINES, METAL BOX CRIMPING MACHINES, METAL PART CRIMPING MACHINES; INDUSTRIAL ROBOTIZED METAL BOX CRIMPING MACHINES(CANCELLED)
IC 009. US 021 023 026 036 038. G & S: SIGNAL ACQUISITION AND ANALYSIS SOFTWARE FOR CRIMPING LINE MONITORING(CANCELLED)
IC 037. US 100 103 106. G & S: MACHINE TOOL INSTALLATION AND MAINTENANCE SERVICES; INSTALLATION AND MAINTENANCE SERVICES FOR METAL PART CRIMPING MACHINES(CANCELLED)
IC 042. US 100 101. G & S: CONSULTING SERVICES, NAMELY, SERVICES PROVIDED BY AN ENGINEER IN RELATION TO INDUSTRIAL CRIMPING MACHINES; IN PARTICULAR NEEDS AND CONSTRAINTS ASSESSMENTS, RESEARCH AND TECHNIQUE DESIGN, SITE ANALYSIS, TECHNICAL ASSISTANCE, REMOTE MONITORING AND CONTROL, EXPERT EVALUATIONS, ACQUISITION AND CERTIFICATION OF INDUSTRIAL PROPERTY RIGHTS
International Codes: | 7 |
U.S. Codes: | 013,019,021,023,031,034,035 |
International Codes: | 9 |
U.S. Codes: | 021,023,026,036,038 |
International Codes: | 37 |
U.S. Codes: | 100,103,106 |
International Codes: | 42 |
U.S. Codes: | 100,101 |
Type Code | Type |
---|---|
GS0071 | MACHINE TOOLS, NAMELY, FEEDERS; INDUSTRIAL ROBOTIZED MACHINE TOOLS, NAMELY, CRIMPING CAMS FOR METAL PART CRIMPING MACHINES, CRIMPING CAMS FOR METAL BOX CRIMPING MACHINES; METAL CRIMPING MACHINES, METAL BOX CRIMPING MACHINES, METAL PART CRIMPING MACHINES; INDUSTRIAL ROBOTIZED METAL BOX CRIMPING MACHINES |
Description | Date | Proceeding Number |
---|---|---|
CANCELLED SEC. 8 (6-YR) | 2009-09-26 | |
CASE FILE IN TICRS | 2008-03-06 | |
REGISTERED-PRINCIPAL REGISTER | 2003-02-18 | |
Sec. 1(B) CLAIM DELETED | 2002-11-06 | 71034 |
NOTICE OF ALLOWANCE CANCELLED | 2002-11-06 | |
PAPER RECEIVED | 2002-06-13 | |
NOA MAILED - SOU REQUIRED FROM APPLICANT | 2002-05-07 | |
PUBLISHED FOR OPPOSITION | 2002-02-12 | |
NOTICE OF PUBLICATION | 2002-01-23 | |
APPROVED FOR PUB - PRINCIPAL REGISTER | 2001-08-20 | |
CORRESPONDENCE RECEIVED IN LAW OFFICE | 2001-07-02 | |
NON-FINAL ACTION MAILED | 2001-04-19 | |
ASSIGNED TO EXAMINER | 2001-04-13 | 78065 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.