Mark For: ENCAM® trademark registration is intended to cover the categories of metal fasteners for use in manufacturing parts and mechanical engine parts for motor vehicles, namely, nuts, gears, gearblanks, metal housings, cam shafts, cams, bushings, hubs, shafts, spring retainers, threaded metal fasteners and components built of at least one of the aforementioned parts. [all]
Status
2022-09-20 UTC
DEAD REGISTRATION Cancelled Invalidated
The trademark application was registered, but subsequently it was cancelled or invalidated and removed from the registry.
(Metal goods) Common metals and their alloys; metal building materials; transportable buildings of metal; materials of metal for railway tracks; non-electric cables and wires of common metal; iron mongery, small items of metal hardware; pipes and tubes of metal; safes; goods of common metal not included in other classes; ores.
Filed Use
No
Current Use
No
Intent To Use
No
Filed ITU
Yes
44D Filed
Yes
44E Current
Yes
66A Current
No
Current Basis
No
No Basis
No
Cancellation Code
2
Domestic Representative
JACOBSON HOLMAN PLLC
Attorney Name
HARVEY B. JACOBSON JR
Attorney Docket Number
T32202US0
Law Office Assigned
M50
Employee Name
KLINE, MATTHEW C
Timeline
2000-11-21
Application Filed
2002-04-30
Published
2002-04-30
Published for Opposition
2003-05-13
Trademark Registered
2008-02-13
Location: SCANNING ON DEMAND
2009-12-19
Cancelled
2009-12-19
Status: Dead/Cancelled
2009-12-19
Status: Registration cancelled because registrant did not file an acceptable declaration under Section 8. To view all documents in this
HARVEY B. JACOBSON JR JACOBSON HOLMAN PLLC 400 SEVENTH STREET WASHINGTON DC 20004-2201
Good, Services, and Codes
(CANCELLED) IC 006. US 002 012 013 014 023 025 050. G & S: Metal fasteners for use in manufacturing parts and mechanical engine parts for motor vehicles, namely, nuts, gears, gearblanks, metal housings, cam shafts, cams, bushings, hubs, shafts, spring retainers, threaded metal fasteners and components built of at least one of the aforementioned parts
International Codes:
6
U.S. Codes:
002,012,013,014,023,025,050
Type Code
Type
GS0061
Metal fasteners for use in manufacturing parts and mechanical engine parts for motor vehicles, namely, nuts, gears, gearblanks, metal housings, cam shafts, cams, bushings, hubs, shafts, spring retainers, threaded metal fasteners and components built of at least one of the aforementioned parts
Trademark Filing History
Description
Date
Proceeding Number
CANCELLED SEC. 8 (6-YR)
2009-12-19
AUTOMATIC UPDATE OF ASSIGNMENT OF OWNERSHIP
2008-09-24
CASE FILE IN TICRS
2008-02-13
REGISTERED-PRINCIPAL REGISTER
2003-05-13
Sec. 1(B) CLAIM DELETED
2002-11-14
65362
PAPER RECEIVED
2002-11-14
NOTICE OF ALLOWANCE CANCELLED
2002-11-14
NOA MAILED - SOU REQUIRED FROM APPLICANT
2002-07-23
PUBLISHED FOR OPPOSITION
2002-04-30
NOTICE OF PUBLICATION
2002-04-10
APPROVED FOR PUB - PRINCIPAL REGISTER
2002-01-15
CORRESPONDENCE RECEIVED IN LAW OFFICE
2001-11-02
NON-FINAL ACTION MAILED
2001-05-02
ASSIGNED TO EXAMINER
2001-03-30
72471
ASSIGNED TO EXAMINER
2001-03-27
77877
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.