Mark For: E-CLAMP® trademark registration is intended to cover the categories of machines and machine tools, namely, electrically controlled closing unit for the fabrication of products by means of injection moulding, pressing, shaping and other similar production methods and parts and fittings thereof; machines and machine tools, namely, moulds and automated stampers, and parts and fittings thereof. [all]
Status
2022-10-01 UTC
DEAD REGISTRATION Cancelled Invalidated
The trademark application was registered, but subsequently it was cancelled or invalidated and removed from the registry.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
No
Current Use
Yes
Intent To Use
No
Filed ITU
Yes
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Cancellation Code
2
Domestic Representative
Burns, Doane, Swecker & Mathis, L.L.P.
Attorney Name
Bassam N. Ibrahim
Attorney Docket Number
030887-051
Law Office Assigned
L30
Employee Name
MCBRIDE, THEODORE M
Timeline
2000-09-13
Application Filed
2001-06-26
Date of First Use
2001-06-26
Date of Use In Commerce
2002-04-09
Published
2002-04-09
Published for Opposition
2003-11-25
Trademark Registered
2003-12-02
Location: FILE REPOSITORY (FRANCONIA)
2010-07-03
Cancelled
2010-07-03
Status: Dead/Cancelled
2010-07-03
Status: Registration cancelled because registrant did not file an acceptable declaration under Section 8. To view all documents in this
BASSAM N. IBRAHIM BURNS DOANE SWECKER & MATHIS L L P PO BOX 1404 ALEXANDRIA VA 22313-1404
Good, Services, and Codes
(CANCELLED) IC 007. US 013 019 021 023 031 034 035. G & S: MACHINES AND MACHINE TOOLS, NAMELY, ELECTRICALLY CONTROLLED CLOSING UNIT FOR THE FABRICATION OF PRODUCTS BY MEANS OF INJECTION MOULDING, PRESSING, SHAPING AND OTHER SIMILAR PRODUCTION METHODS AND PARTS AND FITTINGS THEREOF; MACHINES AND MACHINE TOOLS, NAMELY, MOULDS AND AUTOMATED STAMPERS, AND PARTS AND FITTINGS THEREOF. FIRST USE: 20010626. FIRST USE IN COMMERCE: 20010626
International Codes:
7
U.S. Codes:
013,019,021,023,031,034,035
Type Code
Type
GS0071
MACHINES AND MACHINE TOOLS, NAMELY, ELECTRICALLY CONTROLLED CLOSING UNIT FOR THE FABRICATION OF PRODUCTS BY MEANS OF INJECTION MOULDING, PRESSING, SHAPING AND OTHER SIMILAR PRODUCTION METHODS AND PARTS AND FITTINGS THEREOF; MACHINES AND MACHINE TOOLS, NAMELY, MOULDS AND AUTOMATED STAMPERS, AND PARTS AND FITTINGS THEREOF
Trademark Filing History
Description
Date
Proceeding Number
CANCELLED SEC. 8 (6-YR)
2010-07-03
REGISTERED-PRINCIPAL REGISTER
2003-11-25
ASSIGNED TO EXAMINER
2003-09-30
76134
ALLOWED PRINCIPAL REGISTER - SOU ACCEPTED
2003-09-30
CASE FILE IN TICRS
2003-09-16
STATEMENT OF USE PROCESSING COMPLETE
2003-08-16
USE AMENDMENT FILED
2003-06-30
SOU EXTENSION 2 GRANTED
2003-06-30
SOU EXTENSION 2 FILED
2003-06-30
PAPER RECEIVED
2003-06-30
SOU EXTENSION 1 GRANTED
2002-12-23
SOU EXTENSION 1 FILED
2002-12-23
PAPER RECEIVED
2002-12-23
NOA MAILED - SOU REQUIRED FROM APPLICANT
2002-07-02
PUBLISHED FOR OPPOSITION
2002-04-09
NOTICE OF PUBLICATION
2002-03-20
APPROVED FOR PUB - PRINCIPAL REGISTER
2001-12-13
CORRESPONDENCE RECEIVED IN LAW OFFICE
2001-09-06
NON-FINAL ACTION MAILED
2001-03-06
ASSIGNED TO EXAMINER
2001-02-21
78324
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.