Mark For: LAB-VOLT AUTOMATION® trademark registration is intended to cover the categories of cNC Lathes, Rotary Turrets for Lathes, CNC Milling Machines, Programmable Robots, for students; slide mounts, conveyors and feeders, all for use with programmable robots for students. [all]
Status
2022-10-15 UTC
DEAD REGISTRATION Cancelled Invalidated
The trademark application was registered, but subsequently it was cancelled or invalidated and removed from the registry.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
Yes
Current Use
Yes
Intent To Use
No
Filed ITU
No
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Cancellation Code
2
Attorney Name
James R Frederick
Attorney Docket Number
865-030
Law Office Assigned
L40
Employee Name
ROBINSON, JOHANNA B
Timeline
1998-12-11
Date of First Use
1998-12-11
Date of Use In Commerce
2000-06-02
Application Filed
2001-08-28
Published
2001-08-28
Published for Opposition
2001-11-20
Trademark Registered
2007-01-16
Location: SCANNING ON DEMAND
2008-08-22
Cancelled
2008-08-22
Status: Dead/Cancelled
2008-08-22
Status: Registration cancelled because registrant did not file an acceptable declaration under Section 8. To view all documents in this
JAMES R FREDERICK WARE FRESSOLA VAN DER SLUYS & ADOLPHSON BRADFORD GREEN BUILDING FIVE 755 MAIN STREET P O BOX 224 MONROE CONNECTICUT 06468
Good, Services, and Codes
(CANCELLED) IC 007. US 013 019 021 023 031 034 035. G & S: CNC Lathes, Rotary Turrets for Lathes, CNC Milling Machines, Programmable Robots, for students; slide mounts, conveyors and feeders, all for use with programmable robots for students. FIRST USE: 19981211. FIRST USE IN COMMERCE: 19981211(CANCELLED) IC 016. US 002 005 022 023 029 037 038 050. G & S: Student manuals and instructor manuals in the field of programming and operation of CNC Lathes, CNC milling machines and programmable robots for students. FIRST USE: 19981211. FIRST USE IN COMMERCE: 19981211
International Codes:
7
U.S. Codes:
013,019,021,023,031,034,035
International Codes:
16
U.S. Codes:
002,005,022,023,029,037,038,050
Type Code
Type
D10000
"AUTOMATION"
Trademark Filing History
Description
Date
Proceeding Number
CANCELLED SEC. 8 (6-YR)
2008-08-22
CASE FILE IN TICRS
2007-01-16
REGISTERED-PRINCIPAL REGISTER
2001-11-20
PUBLISHED FOR OPPOSITION
2001-08-28
NOTICE OF PUBLICATION
2001-08-08
APPROVED FOR PUB - PRINCIPAL REGISTER
2001-05-30
EXAMINER'S AMENDMENT MAILED
2001-05-21
NON-FINAL ACTION MAILED
2001-02-13
ASSIGNED TO EXAMINER
2000-12-01
78058
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.