Mark For: JKJETLIFT® trademark registration is intended to cover the categories of mining, ore processing and rock construction equipment and control mechanisms therefor, namely, mills, crushing machines, grinding machines, excavation machines, pulverizers, impact or pneumatic hammers, vibrating screens and pulp lifters for separating ore from gangue, and replacemet parts therefor. [all]
Status
2022-10-26 UTC
DEAD REGISTRATION Cancelled Invalidated
The trademark application was registered, but subsequently it was cancelled or invalidated and removed from the registry.
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
Primary International Class
007 - Primary Class
(Machinery) Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
Filed Use
No
Current Use
No
Intent To Use
No
Filed ITU
No
44D Filed
Yes
44E Current
Yes
66A Current
No
Current Basis
No
No Basis
No
Cancellation Code
2
Domestic Representative
Arnall, Golden & Gregory, LLP
Attorney Name
Scott E. Taylor
Attorney Docket Number
13025-4
Law Office Assigned
M50
Employee Name
THOMPKINS, TRICIA M
Timeline
2000-03-22
Application Filed
2001-12-04
Published
2001-12-04
Published for Opposition
2002-02-26
Trademark Registered
2007-03-30
Location: SCANNING ON DEMAND
2008-11-28
Cancelled
2008-11-28
Status: Dead/Cancelled
2008-11-28
Status: Registration cancelled because registrant did not file an acceptable declaration under Section 8. To view all documents in this
Scott E. Taylor, Esq. Arnall Golden Gregory LLP Suite 2100 171 17th Street Atlanta GA 30363
Good, Services, and Codes
(CANCELLED) IC 007. US 013 019 021 023 031 034 035. G & S: MINING, ORE PROCESSING AND ROCK CONSTRUCTION EQUIPMENT AND CONTROL MECHANISMS THEREFOR, NAMELY, MILLS, CRUSHING MACHINES, GRINDING MACHINES, EXCAVATION MACHINES, PULVERIZERS, IMPACT OR PNEUMAT IC HAMMERS, VIBRATING SCREENS AND PULP LIFTERS FOR SEPARATING ORE FROM GANGUE, AND REPLACEMET PARTS THEREFOR
International Codes:
7
U.S. Codes:
013,019,021,023,031,034,035
Type Code
Type
GS0071
MINING, ORE PROCESSING AND ROCK CONSTRUCTION EQUIPMENT AND CONTROL MECHANISMS THEREFOR, NAMELY, MILLS, CRUSHING MACHINES, GRINDING MACHINES, EXCAVATION MACHINES, PULVERIZERS, IMPACT OR PNEUMATIC HAMMERS, VIBRATING SCREENS AND PULP LIFTERS FOR SEPARATING ORE FROM GANGUE, AND REPLACEMET PARTS THEREFOR
Trademark Filing History
Description
Date
Proceeding Number
CANCELLED SEC. 8 (6-YR)
2008-11-28
CASE FILE IN TICRS
2007-03-30
TEAS CHANGE OF CORRESPONDENCE RECEIVED
2004-12-17
REGISTERED-PRINCIPAL REGISTER
2002-02-26
PUBLISHED FOR OPPOSITION
2001-12-04
NOTICE OF PUBLICATION
2001-11-14
APPROVED FOR PUB - PRINCIPAL REGISTER
2001-07-23
EXAMINERS AMENDMENT MAILED
2001-07-12
CORRESPONDENCE RECEIVED IN LAW OFFICE
2001-03-20
NON-FINAL ACTION MAILED
2000-09-22
ASSIGNED TO EXAMINER
2000-09-17
77770
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.